A-Tech
A-Tech 192GB (6x32GB) DDR4-2400 ECC RDIMM 2Rx4 CL17 1.20V memory upgrade
192GB registered ECC DDR4 kit with six 32GB modules at 2400MHz CL17 for Dell PowerEdge 13th generation rack servers
- Capacity192GB (6 x 32GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCYes
- Boosts server capacity to 192GB with six 32GB modules
- ECC registered DDR4 protects data integrity in critical workloads
- CL17 latency at 2400MHz delivers responsive performance for virtualization
- 20V operation reduces power draw across 13th Gen PowerEdge racks
- Validated for R430, R530, R630, R730, R830 and R930 servers
192GB DDR4 ECC RDIMM kit for 13th Gen PowerEdge
This A-Tech memory kit delivers 192GB across six 32GB registered DDR4 modules rated at 2400MHz with CL17 latency and 1.20V operation. It is built for Dell PowerEdge 13th generation rack servers including the R430, R530, R630, R730, R730xd, R830 and R930 families.
Suited for servers needing maximum registered ECC
The 2Rx4 registered DIMMs provide error correction and signal buffering required by these platforms. Buyers with desktop or laptop systems cannot use this memory because those platforms only accept non-ECC unbuffered modules. Builders who need load-reduced DIMMs should also look elsewhere since registered and load-reduced types cannot be mixed.
Six modules fill half the slots on most supported
The kit comfortably handles virtualisation, database and compute workloads that benefit from large registered ECC pools. Capacity runs out when applications demand more than 192GB or when the server’s maximum supported memory per socket is lower than the installed total.
จุดเด่น
- Boosts server capacity to 192GB with six 32GB modules
- ECC registered DDR4 protects data integrity in critical workloads
- CL17 latency at 2400MHz delivers responsive performance for virtualization
- 20V operation reduces power draw across 13th Gen PowerEdge racks
- Validated for R430, R530, R630, R730, R830 and R930 servers
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Series | 13th Gen Dell PowerEdge Rack Server Compatible |
| Model | 192GB (6x32GB) 2Rx4 DDR4-2400 RDIMM for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930 |
| Part Number | NE-MS-0030 |
| Capacity | 192GB (6 x 32GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930 | 13th Gen Rack Servers |
| Option | Compatible with Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930 |
| Features | Designed for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830, R930 |
| Package Content | Six Modules |
คำถามเกี่ยวกับสินค้านี้
Which Dell PowerEdge server do I need to install these 288-pin DDR4-2400 RDIMMs?
This kit is designed for Dell PowerEdge R430, R530, R630, R630 XL, R730, R730 XL, R730xd, R730xd XL, R830 and R930 13th Gen rack servers.
Can I mix these 2Rx4 registered ECC modules with my existing load-reduced ECC DIMMs?
No, ECC registered and ECC load-reduced modules cannot be mixed; all installed modules must share the same ECC type.
How do I confirm the kit is running at DDR4-2400 CL17 after installation?
Check the system BIOS or iDRAC memory configuration screen; it will report 2400 MHz speed and CL17 latency for each of the six 32 GB modules.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



