A-Tech
A-Tech 32GB DDR4 2933 ECC RDIMM 2Rx8 server RAM
32 GB DDR4 ECC registered DIMM at 2933 MHz with CL21 latency for server workloads
- Capacity32GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2933 (PC4 23400)
- CAS LatencyCL21
- Voltage1.20V
- ECCYes
- 32 GB capacity handles heavy server workloads
- ECC registered design corrects data errors automatically
- DDR4 2933 MHz speed moves data quickly
- 2Rx8 dual-rank layout increases memory density
- 20 V standard voltage keeps power draw low
32GB DDR4 2933 ECC RDIMM for Servers
This 32GB module runs at DDR4 2933 with CL21 latency and 1.20V voltage. It uses a 288-pin registered DIMM layout with 2Rx8 dual-rank organisation and on-board ECC. The stick is built for server and workstation platforms that require registered memory.
Replaces slower or non-ECC DDR4 in supported systems
The upgrade is worthwhile when your workload demands error correction and registered signalling at 2933 MT/s. It will not function in desktop or laptop boards that accept only unbuffered UDIMMs, so buyers needing consumer memory should look elsewhere.
Installs like any standard 288-pin DIMM
Align the key notch, press firmly until the retention clips lock, and follow the system manual for correct channel population. Common issues arise when mixing ranks or speeds across channels, or when the platform firmware does not recognise the registered module.
จุดเด่น
- 32 GB capacity handles heavy server workloads
- ECC registered design corrects data errors automatically
- DDR4 2933 MHz speed moves data quickly
- 2Rx8 dual-rank layout increases memory density
- 20 V standard voltage keeps power draw low
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 32GB 2Rx8 PC4-2933Y-R |
| Part Number | AT32G1D4D2933RD8N12V |
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Multi-channel Kit | Single Module |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server Systems |
คำถามเกี่ยวกับสินค้านี้
Does the 288-pin DDR4 DIMM fit standard server memory slots?
Yes, the module uses the standard 288-pin DDR4 DIMM form factor used by compatible servers and workstations.
How do I install the registered ECC module correctly?
Align the notch with the slot key, press firmly until both side clips click, and follow the system manual for channel population rules.
Will the 1.2V DDR4 chips need active cooling later?
No heat spreader is fitted; the module runs at standard 1.2V and relies on normal chassis airflow.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



