A-Tech
A-Tech 32GB DDR5 4800 CL40 ECC SODIMM 262-Pin 1.10V
32 GB DDR5 4800 ECC SO-DIMM for laptops and microservers, CL40 at 1.1 V with 262-pin fit
- Capacity32GB
- Type262-Pin DDR5 SO-DIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCYes
- 32 GB capacity handles heavier workloads
- DDR5 4800 speed moves data faster
- CL40 latency keeps timing tight
- ECC protection detects memory errors
- 10 V operation matches DDR5 standard
32GB DDR5 4800 ECC SODIMM for Microservers
This 32GB DDR5 4800 CL40 ECC SODIMM operates at 1.10V and uses a 262-pin unbuffered design. It is built as a compatible replacement for the Samsung M426R4GA3BB0-CQK module. The memory targets microserver, server and workstation systems that require error-correcting code capability.
Suits ECC-capable DDR5 platforms needing 32GB
Buyers whose laptops or desktops lack ECC support in the memory controller should look elsewhere, as the extra parity bits provide no benefit on non-ECC hardware. Systems limited to lower DDR5 speeds or different pin counts also cannot use this module.
262-pin DDR5 SO-DIMM form factor decides fit
The module installs only in slots wired for 262-pin DDR5 SO-DIMMs with ECC unbuffered signalling. Verifying that the platform explicitly supports this exact form factor and ECC type is the single step that confirms compatibility.
จุดเด่น
- 32 GB capacity handles heavier workloads
- DDR5 4800 speed moves data faster
- CL40 latency keeps timing tight
- ECC protection detects memory errors
- 10 V operation matches DDR5 standard
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Samsung |
| Model | M426R4GA3BB0-CQK |
| Capacity | 32GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | M426R4GA3BB0-CQK |
| Recommend Use | Compatible Replacement for Samsung M426R4GA3BB0-CQK |
คำถามเกี่ยวกับสินค้านี้
What speed does the DDR5 4800 interface actually run at?
The module operates at DDR5 4800 MHz, labelled PC5-38400, which is the standard data rate for this specification.
Will the 262-pin SO-DIMM fit my laptop slot?
Yes, it uses the standard 262-pin DDR5 SO-DIMM form factor, so it fits any socket that accepts DDR5 laptop memory.
How do I install the module and what step is often missed?
Power off the system, open the memory door, align the notch on the 262-pin module with the slot key, press firmly until the side clips click, then verify the new 32 GB capacity in BIOS.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



