SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501555BTC
มีสินค้า
A-Tech
A-Tech 32GB DDR5 5600 ECC RDIMM 2Rx8 for Hynix HMCG88AGBRA server RAM
32GB DDR5 5600 ECC registered RDIMM for Hynix HMCG88AGBRA server systems
- Capacity32GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS Latency40
- Voltage1.10V
- ECCYes
- 32 GB DDR5 capacity supports heavy server workloads
- 5600 MHz DDR5 speed delivers high data throughput
- ECC RDIMM design corrects errors for data integrity
- 2Rx8 registered architecture enables dense memory scaling
- 10 V standard voltage ensures efficient power use
32GB DDR5 5600 ECC RDIMM for servers
This 32GB registered DIMM operates at 5600 MT/s with a CAS latency of 40 and a standard 1.10 V voltage. It uses a 2Rx8 organisation and major-brand DRAM ICs on a 288-pin DDR5 form factor. The module is built as a compatible replacement for Hynix HMCG88AGBRA and the 188N, 190N, 191N, 192N part numbers. It targets server and workstation platforms that require ECC error correction.
Sustained-load behaviour with registered ECC
The registered buffer reduces electrical load on the memory controller, helping maintain signal integrity when all channels are populated. ECC circuitry corrects single-bit errors and detects multi-bit errors during continuous operation, protecting data integrity under heavy workloads. The module runs at the JEDEC-standard 1.10 V, keeping power draw predictable during extended duty cycles. No heat spreader is fitted, so chassis airflow must carry away the heat generated by the DRAM chips.
Pre-order checklist for your platform
Verify that your motherboard supports DDR5 RDIMMs and accepts 2Rx8 modules at 5600 MT/s. Confirm the maximum registered DIMM capacity per slot and the total number of slots available. Check the system manual for required population rules and channel configurations. Ensure the BIOS is updated to a version that recognises this module density and rank structure. Buyers needing unbuffered UDIMMs or a different rank configuration should look elsewhere.
จุดเด่น
- 32 GB DDR5 capacity supports heavy server workloads
- 5600 MHz DDR5 speed delivers high data throughput
- ECC RDIMM design corrects errors for data integrity
- 2Rx8 registered architecture enables dense memory scaling
- 10 V standard voltage ensures efficient power use
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix HMCG88AGBRA HMCG88AGBRA188N HMCG88AGBRA190N HMCG88AGBRA191N HMCG88AGBRA192N |
| Model | A-Tech 32GB DDR5-5600 ECC RDIMM Server RAM Module |
| Capacity | 32GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
คำถามเกี่ยวกับสินค้านี้
How much power does the 1.10 V DDR5 5600 RDIMM draw under sustained load?
The module runs at the standard DDR5 voltage of 1.10 V; actual power draw depends on the server platform and workload.
Does my motherboard need a 288-pin DDR5 RDIMM slot to accept this 32 GB 2Rx8 module?
Yes — it requires a DDR5 288-pin registered DIMM slot with ECC support.
Can this 2Rx8 DDR5 5600 ECC RDIMM run alongside other registered DDR5 modules in the same server?
It can operate with other DDR5 RDIMMs, but all modules must match speed, voltage and rank configuration for stable operation.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
