A-Tech
A-Tech 32GB DDR5 5600 ECC UDIMM 2Rx8 Server Memory
32 GB DDR5 5600 ECC UDIMM 2Rx8 server module with 1.10 V operation and CL40 latency
- Capacity32GB
- Type288-Pin DDR5 SDRAM
- SpeedDDR5 5600 (PC5 44800)
- CAS Latency40
- Voltage1.10V
- ECCYes
- 32 GB capacity handles heavy server workloads
- DDR5 5600 speed accelerates data throughput
- ECC protection detects and corrects memory errors
- 2Rx8 dual-rank design maximises density per slot
- 10 V operation reduces power draw
32GB DDR5 ECC UDIMM for server workloads
This 32GB DDR5 5600 module delivers ECC protection in an unbuffered 288-pin form factor. It suits administrators who need data integrity on compatible workstation or entry-level server boards.
Unbuffered design with major-brand DRAM chips
The module runs at 1.1V with a CAS latency of 40 and uses a 2Rx8 organisation. No heat spreader is fitted, so airflow across the PCB is the only cooling path in dense chassis.
Verify DDR5 UDIMM ECC support before ordering
Check that your motherboard accepts 288-pin DDR5 unbuffered ECC memory and can operate at 5600 MT/s. Systems limited to registered DIMMs or earlier DDR generations will not accept this module.
จุดเด่น
- 32 GB capacity handles heavy server workloads
- DDR5 5600 speed accelerates data throughput
- ECC protection detects and corrects memory errors
- 2Rx8 dual-rank design maximises density per slot
- 10 V operation reduces power draw
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix HMCG88AGBEA081N |
| Model | A-Tech 32GB DDR5-5600 ECC UDIMM Server RAM Module |
| Capacity | 32GB |
| Type | 288-Pin DDR5 SDRAM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
คำถามเกี่ยวกับสินค้านี้
Does DDR5 5600 PC5-44800 mean this module runs at 5600 MT/s?
Yes, the module is rated DDR5 5600 which operates at 5600 MT/s and carries the PC5-44800 designation.
Will this 288-pin UDIMM fit my server board that takes standard DDR5 DIMMs?
The module uses the 288-pin DDR5 DIMM form factor, matching standard DDR5 UDIMM sockets.
What is the correct way to seat this ECC UDIMM so the system recognises all 32GB?
Align the notch with the slot key, press straight down until both retention clips click, and follow the motherboard manual for channel population order.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



