A-Tech
A-Tech 64GB (2x32GB) DDR5 4800 ECC SODIMM CL40 1.1V 2Rx8 laptop RAM
ECC DDR5 SODIMM kit adds 64 GB across two dual-rank 32 GB modules at 4800 MT/s CL40 1.1 V for compatible microservers, mobile workstations and NAS servers
- Capacity64GB (2 x 32GB)
- Type262-Pin DDR5 SO-DIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCYes
- 64GB kit expands multitasking headroom with two 32GB modules
- DDR5 4800 speed accelerates data throughput for demanding workloads
- ECC unbuffered design detects and corrects memory errors automatically
- Dual-rank 2Rx8 organisation increases memory density per channel
- JEDEC-standard 1.1V operation reduces power draw and heat
ECC DDR5 SODIMM kit for mobile workstations
This 64GB kit contains two 32GB DDR5 4800 SODIMM modules with ECC and a CAS latency of CL40. It is built for laptops, microservers and NAS units that accept 262-pin unbuffered ECC memory. The dual-rank 2Rx8 organisation and 1.1V operation follow the JEDEC DDR5 standard.
Dual-channel kit with on-die error correction
The two modules are matched for dual-channel operation, doubling throughput compared with a single stick. ECC circuitry detects and corrects single-bit errors inside the DRAM array, protecting data integrity in always-on servers and workstations without requiring registered or buffered signalling.
64GB capacity for virtualised workloads
Sixty-four gigabytes lets a mobile workstation or microserver run multiple virtual machines, large datasets or ZFS caches simultaneously. The 4800 MT/s speed and CL40 latency deliver mainstream DDR5 bandwidth, while the fixed 1.1V voltage keeps power draw predictable. Systems limited to lower speeds or non-ECC slots cannot use this kit.
จุดเด่น
- 64GB kit expands multitasking headroom with two 32GB modules
- DDR5 4800 speed accelerates data throughput for demanding workloads
- ECC unbuffered design detects and corrects memory errors automatically
- Dual-rank 2Rx8 organisation increases memory density per channel
- JEDEC-standard 1.1V operation reduces power draw and heat
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR5 ECC SODIMM |
| Model | A-Tech 32GB 2Rx8 PC5-38400 ECC SODIMM |
| Part Number | NE-SS-0616 |
| Capacity | 64GB (2 x 32GB) |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| Features | ECC SODIMM |
| Recommend Use | AMD & Intel Compatible |
| Option | ECC SODIMM |
คำถามเกี่ยวกับสินค้านี้
Will the dual-rank 2Rx8 modules need any firmware updates or special handling when I add them later?
The kit uses standard JEDEC DDR5 4800 modules at 1.1 V; no firmware updates are required and the modules are handled like any other SODIMM.
What limit appears first when the memory runs at full 4800 MHz CL40 continuously?
Sustained operation is constrained by the JEDEC 1.1 V voltage ceiling and the CL40 latency ceiling; the modules have no heat spreader so thermal headroom is the practical limit.
How much heat and power draw should I expect from the 64 GB kit running all day in a microserver?
Each 32 GB module operates at the standard 1.1 V DDR5 voltage with no heat spreader, so power draw stays at the JEDEC baseline and heat output is low for continuous use.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



