A-Tech
A-Tech 8GB DDR3L 1066 ECC RDIMM 4Rx8 Server RAM
An 8 GB DDR3L 1066 MHz ECC registered DIMM for server and workstation upgrades
- Capacity8GB
- SpeedDDR3L 1066 (PC3L 8500)
- CAS LatencyCL3
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- 8GB capacity expands server memory for heavier workloads
- DDR3L 1066MHz speed matches PC3-8500 system requirements
- ECC registered design detects and corrects data errors
- 35V low voltage reduces power draw and heat
- 240-pin DIMM form factor fits standard DDR3 server slots
Server DDR3L RDIMM module
This 8 GB registered DIMM runs at 1066 MHz with a CAS latency of CL3 and operates at 1.35 V. It uses a 4Rx8 organisation built on Samsung chipset and carries ECC for error correction in server workloads.
Compatibility checklist
Verify that your motherboard accepts DDR3L RDIMM modules at PC3-8500 speed and supports 4Rx8 registered memory. Confirm the system can address an 8 GB module in the target slot and that the BIOS recognises registered ECC DIMMs.
Build and connectors
The module uses a 240-pin DIMM edge connector despite the 262-pin form-factor reference in the data sheet. Low-voltage 1.35 V operation reduces heat output in dense server chassis. Registered buffering adds one clock cycle of latency but improves signal integrity on heavily populated memory buses.
จุดเด่น
- 8GB capacity expands server memory for heavier workloads
- DDR3L 1066MHz speed matches PC3-8500 system requirements
- ECC registered design detects and corrects data errors
- 35V low voltage reduces power draw and heat
- 240-pin DIMM form factor fits standard DDR3 server slots
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Samsung |
| Model | M392B1K73CM0-YF8 |
| Capacity | 8GB |
| Speed | DDR3L 1066 (PC3L 8500) |
| CAS Latency | CL3 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx8 |
| Chipset | Samsung Chipset |
| Features | M392B1K73CM0-YF8 |
คำถามเกี่ยวกับสินค้านี้
Does the box contain only the single 8GB DDR3L 1066 ECC RDIMM or are any cables or brackets included?
The package includes one 8GB DDR3L 1066MHz PC3L-8500 ECC Registered DIMM module; no cables, brackets or additional hardware are supplied.
Should I choose this 4Rx8 registered module or look for a different rank configuration for my server?
Select this 4Rx8 registered ECC module if your server requires DDR3L 1066 registered memory with that rank organisation; otherwise verify the platform’s qualified vendor list for supported rank and voltage combinations.
What does the 1066MHz PC3L-8500 rating mean for actual throughput once the module is installed?
The module transfers data at 1066 MT/s, delivering a peak bandwidth of 8500 MB/s per channel when the memory controller runs at the rated DDR3L 1066 speed.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



