A-Tech 8GB DDR3 1866 ECC UDIMM 2Rx8 1.5V 240-Pin Server RAM
- 8GB
- DDR3 1866 (PC3 1490…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
8GB DDR4 2133 MHz ECC registered server DIMM with single-rank x8 layout and CL15 latency
Capacity 8GB
This A-Tech module is an 8GB DDR4 2133 MHz ECC Registered DIMM built for servers and workstations. It uses a 288-pin form factor, runs at 1.20V with CL15 latency, and carries a single-rank x8 organisation. Major-brand chips and on-board error correction protect data integrity in demanding enterprise workloads.
Buyers whose systems require unbuffered UDIMM memory, non-ECC modules, or a different DDR generation cannot use this part. It is also unsuitable for builds that need a multi-module kit or a higher speed grade than PC4-17000.
The single-rank x8 registered ECC design is the decisive specification; the motherboard must explicitly support DDR4 RDIMM with this rank configuration for the module to function.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 8GB 1Rx8 PC4-2133P-R |
| Part Number | AT8G1D4D2133RS8N12V |
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Multi-channel Kit | Single Module |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server Systems |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The box contains one 8 GB DDR4 2133 ECC registered DIMM. No additional components are required; the module plugs directly into a compatible 288-pin server or workstation memory slot.
Those values describe this single module: it is a single-rank x8 design with CAS latency 15 and standard 1.20 V DDR4 voltage. Match all three to your system's qualified memory list to ensure compatibility.
The module will run at up to 2133 MT/s (PC4-17000) if the platform supports that data rate; otherwise it will down-clock to the highest speed the memory controller allows while maintaining ECC and registered operation.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม