A-Tech
A-Tech 8GB DDR4 2400 ECC UDIMM 1Rx8 Server Memory
8GB DDR4 2400MHz ECC UDIMM server memory module with CL17 latency and 1.2V operation
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCYes
- Buffered/RegisteredUnbuffered
- ECC protection guards data integrity with built-in error correction
- 2400 MHz DDR4 speed delivers 19200 MB/s bandwidth for server workloads
- 20 V standard voltage reduces power draw in 24/7 systems
- 1Rx8 single-rank layout keeps signal loading light on memory controllers
- Direct replacement for Micron MTA9ASF1G72AZ-2G3A1 and MTA9ASF1G72AZ-2G3B1 modules
Server DDR4 ECC UDIMM 8GB
This 8GB DDR4 2400MHz ECC unbuffered module targets server and workstation operators who need error-correcting memory for data integrity. It replaces Micron MTA9ASF1G72AZ-2G3A1 and MTA9ASF1G72AZ-2G3B1 parts in compatible platforms. The 1Rx8 organisation and 1.20V operation suit standard DDR4 DIMM slots. Builders requiring registered or load-reduced DIMMs cannot use this module.
Verified compatibility replacement
The module is tested as a direct equivalent for the two Micron part numbers listed, so it fits the same 288-pin DIMM sockets without firmware changes. ECC functionality activates automatically on platforms that support unbuffered error correction. No additional software, heat spreaders or configuration utilities are bundled with the memory stick.
8GB capacity at DDR4 2400 CL17
The single 8GB rank delivers 19200 MB/s peak bandwidth at CL17 latency, handling typical virtualisation hosts, file servers and database workloads that fit within 8GB per slot. Workloads needing larger per-slot densities or higher frequencies will exceed this module's headroom. Systems limited to lower DDR4 speeds will downclock automatically.
จุดเด่น
- ECC protection guards data integrity with built-in error correction
- 2400 MHz DDR4 speed delivers 19200 MB/s bandwidth for server workloads
- 20 V standard voltage reduces power draw in 24/7 systems
- 1Rx8 single-rank layout keeps signal loading light on memory controllers
- Direct replacement for Micron MTA9ASF1G72AZ-2G3A1 and MTA9ASF1G72AZ-2G3B1 modules
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MTA9ASF1G72AZ-2G3A1, MTA9ASF1G72AZ-2G3B1 |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Micron Chipset |
| Features | MTA9ASF1G72AZ-2G3A1, MTA9ASF1G72AZ-2G3B1 |
คำถามเกี่ยวกับสินค้านี้
Will the ECC UDIMM need replacement after a certain number of write cycles?
ECC UDIMM memory does not have a write-cycle limit like flash storage; it is replaced only if a module fails or capacity needs increase.
What limits sustained throughput on this DDR4 2400 CL17 module?
The DDR4 2400 PC4-19200 rating and CL17 latency set the maximum sustained bandwidth and access speed.
How much heat does the 1.20 V 8 GB stick produce under all-day load?
At 1.20 V the module runs at standard DDR4 voltage, generating typical low heat for an unbuffered ECC DIMM.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



