BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
8GB DDR4 3200MHz CL22 SODIMM laptop memory upgrade with 260-pin layout and 1.2V operation
This 260-pin module delivers 8GB of DDR4 memory at 3200MHz with a CL22 latency and 1.20V operating voltage. It is built as an unbuffered, non-ECC stick using a 1Rx8 organisation. The module serves as a direct replacement for Hynix HMA81GS6CJR8N-XN and HMA81GS6DJR8N-XN parts in compatible laptops, notebooks and all-in-one systems.
Installation requires only an available 260-pin SO-DIMM socket and a platform that supports DDR4 3200 operation at 1.2V. The single-module design leaves additional slots free for further capacity expansion if the chassis provides them. No special cooling, firmware updates or proprietary connectors are needed beyond the standard memory interface.
Every stick undergoes quality-assurance testing before shipment to confirm reliable operation at the rated speed and latency. A lifetime warranty covers the module for as long as you own it, and US-based technical support is available before, during and after installation. These services remove the uncertainty that often accompanies generic memory purchases.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
CL22 is the rated CAS latency for this DDR4 3200 module; it sets the baseline access delay under any sustained load.
It operates at the standard DDR4 voltage of 1.20 V, so power draw and heat stay within normal SO-DIMM limits for continuous use.
Your system needs a free DDR4 SO-DIMM slot that supports 3200 MHz (PC4-25600) unbuffered non-ECC memory.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม