Axiom
Axiom 647877-S21-AX 8 GB DDR3-1333 1.35 V ECC Registered server RAM
8 GB DDR3 server memory running at 1333 MHz with ECC and registered buffering at 1.35 V
- SpeedDDR3 SDRAM
- ECCECC
- Buffered/RegisteredRegistered
- 8 GB capacity supports larger server workloads
- DDR3-1333 speed delivers 1333 MHz data rates
- 35 V low voltage reduces power consumption
- ECC registered design corrects errors and buffers signals
- 5 mil slim profile fits dense DIMM slots
Axiom 8 GB DDR3-1333 ECC RDIMM
This Axiom module is an 8 GB DDR3-1333 ECC registered DIMM built for server platforms. It operates at 1.35 V low voltage and runs at 1333 MHz with a PC3-10600 rating. The part is designed for HP Gen 8 systems and uses tier-one components on a 157.5 mil thick PCB.
Who this suits and who should look elsewhere
Administrators upgrading or repairing HP Gen 8 servers that require low-voltage DDR3 ECC registered memory will find guaranteed compatibility. Buyers who need higher capacity modules, faster speeds, or non-ECC unbuffered DIMMs for workstation or desktop boards cannot use this part.
DDR3-1333 ECC registered at 1.35 V
The module delivers 8 GB of DDR3-1333 ECC registered memory at 1.35 V. This specific combination of speed, voltage, error correction, and signal processing determines whether the DIMM matches the server's memory subsystem requirements.
จุดเด่น
- 8 GB capacity supports larger server workloads
- DDR3-1333 speed delivers 1333 MHz data rates
- 35 V low voltage reduces power consumption
- ECC registered design corrects errors and buffers signals
- 5 mil slim profile fits dense DIMM slots
ข้อมูลจำเพาะ
| Brand | Axiom |
|---|---|
| Speed | DDR3 SDRAM |
| ECC | ECC |
| Buffered/Registered | Registered |
| น้ำหนักในการจัดส่ง | 2.27 kg |
| ขนาดบรรจุภัณฑ์ | 127 × 127 × 127 mm |
คำถามเกี่ยวกับสินค้านี้
What speed does the DDR3-1333/PC3-10600 interface actually run at in a Gen 8 server?
The module operates at 1333 MHz, matching the DDR3-1333 standard; the server memory controller sets the final clock.
Will the 157.5 mil thick DIMM clear the heatsinks in an HP Gen 8 chassis?
At 157.5 mil (about 4 mm) the PCB fits the standard DIMM slot clearance used in Gen 8 servers.
Do I need to enable any BIOS setting for the 1.35 V ECC registered module to initialise correctly?
Insert the RDIMM with the server powered off; the BIOS detects ECC and registered operation automatically at 1.35 V.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



