Brute Networks
Brute Networks 128GB DDR4-2666 8Rx4 ECC LRDIMM 1.2V
128 GB DDR4-2666 ECC LRDIMM with 8Rx4 organisation and 1.2 V operation for Cisco-compatible server upgrades
- Capacity128GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 128GB capacity lets you run more VMs per host
- DDR4-2666 speed matches PC4-21300 spec for fast throughput
- 2V operation reduces power draw per module
- 8Rx4 LRDIMM design enables maximum density per slot
- ECC registered reliability protects data integrity in servers
128GB DDR4-2666 8Rx4 ECC LRDIMM
This 128GB DDR4-2666 registered LRDIMM uses an 8Rx4 organisation and runs at 1.20V with ECC. It is a 288-pin module built with major-brand DRAM and rated PC4-21300. The part is 100% Cisco compatible and matches the UCS-MR-128G8RS-H specification for server memory upgrades.
Server builders needing maximum density per slot
This module suits administrators who want to maximise installed memory in compatible Cisco UCS platforms without replacing hardware. Buyers whose systems cannot address 8Rx4 LRDIMMs or require unbuffered DIMMs should look elsewhere.
8Rx4 rank configuration decides fit
The single specification that determines compatibility is the 8Rx4 rank structure. Only platforms qualified for this rank count and LRDIMM form factor will recognise the full 128GB capacity at DDR4-2666 speed.
จุดเด่น
- 128GB capacity lets you run more VMs per host
- DDR4-2666 speed matches PC4-21300 spec for fast throughput
- 2V operation reduces power draw per module
- 8Rx4 LRDIMM design enables maximum density per slot
- ECC registered reliability protects data integrity in servers
ข้อมูลจำเพาะ
| Brand | Cisco |
|---|---|
| Capacity | 128GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 8Rx4 |
| Chipset | Major Brand Chipset |
คำถามเกี่ยวกับสินค้านี้
Does my server need 288-pin DDR4 slots to use this 128GB LRDIMM?
Yes, this module uses the standard 288-pin DDR4 form factor and requires a compatible DDR4 slot that supports Load-Reduced DIMMs.
Can I mix this 8Rx4 LRDIMM with existing 4Rx4 RDIMMs in the same system?
Mixing LRDIMMs and RDIMMs is not supported; all slots must use the same registered memory type for the system to operate correctly.
How do I confirm the module is running at 2666 MT/s after installation?
Check the BIOS memory information or use a system utility such as dmidecode to verify the configured speed shows 2666 MT/s.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



