Brute Networks
Brute Networks 16GB DDR4-2400 2Rx4 Registered RDIMM
16 GB DDR4-2400 registered ECC RDIMM with CL15 latency and 1.2 V operation for IBM-compatible servers
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 16 GB DDR4-2400 registered ECC memory for stable server workloads
- CL15 CAS latency at 1.2 V reduces power draw under load
- 2Rx4 dual-rank organisation increases density per DIMM slot
- 288-pin PC4-19200 module matches IBM 46W0831 specification
- Lifetime warranty with 100 % tested compatibility guarantees long-term operation
Server Memory Upgrade
This 16GB DDR4-2400 registered RDIMM is built for IBM-compatible servers needing ECC-protected capacity. It runs at PC4-19200 speed with CL15 latency and 1.20V operation, using major-brand chips validated for OEM equivalence.
IT Teams Extending Legacy Systems
Suits administrators populating DDR4 slots in supported IBM platforms where registered, dual-rank modules are required. Not for desktops or workstations that accept only unbuffered memory, nor for systems limited to single-rank DIMMs or lower voltages.
Capacity and Headroom
The 16GB module adds substantial headroom for virtualisation workloads and memory-intensive databases within the server's maximum DIMM count. It reaches its limit when the platform's total memory ceiling or channel population rules prevent further registered DIMMs.
จุดเด่น
- 16 GB DDR4-2400 registered ECC memory for stable server workloads
- CL15 CAS latency at 1.2 V reduces power draw under load
- 2Rx4 dual-rank organisation increases density per DIMM slot
- 288-pin PC4-19200 module matches IBM 46W0831 specification
- Lifetime warranty with 100 % tested compatibility guarantees long-term operation
ข้อมูลจำเพาะ
| Brand | IBM |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
คำถามเกี่ยวกับสินค้านี้
Does my server need a 288-pin DDR4 DIMM slot to use this 16GB registered module?
Yes, this module uses the standard 288-pin DDR4 form factor and requires a compatible registered DIMM slot on the motherboard.
Can I mix this 2Rx4 registered RDIMM with older unbuffered DDR4 sticks in the same system?
No, registered and unbuffered memory types cannot be mixed; the motherboard must support registered DIMMs for this module to function.
How do I confirm the module is running at the correct 2400 MT/s speed and CL15 latency after installation?
Check the BIOS memory information or use a system utility such as CPU-Z to verify the reported speed of 2400 MT/s and CAS latency of 15.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



