Brute Networks
Brute Networks 16GB DDR4-2666 ECC UDIMM CL15 1.2V
16 GB DDR4-2666 ECC UDIMM at CL15 and 1.2 V for Dell-compatible servers
- Capacity16GB
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- Buffered/RegisteredUnregistered
- 16GB DDR4-2666 ECC UDIMM expands server memory capacity
- CL15 latency at 2666MHz accelerates data access speed
- 2V operation reduces power draw per module
- Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability
- 100% Dell SNPVDFYDC/16G compatibility protects existing factory warranty
Dell Compatible 16GB DDR4-2666 ECC UDIMM
This Brute Networks module delivers 16GB of DDR4-2666 ECC unbuffered memory for Dell servers and workstations. It operates at 1.2V with CL15 latency and uses a 2Rx8 organisation. The part is equivalent to Dell PN SNPVDFYDC/16G and built with major-brand DRAM.
Upgrade from non-ECC or lower-capacity DIMMs
Replacing standard unbuffered DIMMs without error correction adds data-integrity protection for mission-critical workloads. Moving from 8GB modules to this 16GB density doubles per-slot capacity when the platform supports it. The jump is worth it when ECC is required and the system qualifies PC4-21300 speeds.
Verify UDIMM slots and maximum per-slot capacity
Confirm the target Dell system accepts unregistered ECC UDIMMs rather than registered or load-reduced modules. Check the platform’s qualified-vendor list for PC4-21300 2Rx8 parts and ensure the BIOS revision supports 16GB density per slot. Matching modules are supplied for multi-DIMM configurations.
จุดเด่น
- 16GB DDR4-2666 ECC UDIMM expands server memory capacity
- CL15 latency at 2666MHz accelerates data access speed
- 2V operation reduces power draw per module
- Major-brand Samsung, SK Hynix or Micron chips ensure OEM-grade reliability
- 100% Dell SNPVDFYDC/16G compatibility protects existing factory warranty
ข้อมูลจำเพาะ
| Brand | Dell |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Chipset | Major Brand Chipset |
คำถามเกี่ยวกับสินค้านี้
Does the 288-pin UDIMM slot need to accept 1.20V DDR4 modules?
Yes, the module is a 1.20V DDR4-2666 UDIMM with 2Rx8 organisation, so the slot must support 1.20V unbuffered ECC DDR4 at that speed.
What BIOS step is often missed when adding this ECC UDIMM to a Dell server?
Enable ECC in the BIOS after installation; the server will boot without it but error correction stays inactive until the setting is turned on.
When should the 16GB DDR4-2666 ECC UDIMM be replaced?
Replace it if memory diagnostics report uncorrectable errors or if a firmware update requires higher density than the 16GB capacity provides.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



