Brute Networks
Brute Networks 32GB DDR4-3200 2Rx8 ECC Registered RDIMM 1.2v
32GB DDR4-3200 ECC registered RDIMM for Dell-compatible servers, 2Rx8 at 1.20V
- Capacity32GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 3200 (PC4 25600)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 32GB DDR4-3200 capacity supports heavy server workloads
- ECC registered design protects data integrity in critical applications
- 2V operation reduces power draw and heat output
- 2Rx8 dual-rank layout maximises memory bandwidth per slot
- 100% Dell compatible module maintains factory warranty coverage
Dell-Compatible 32GB DDR4-3200 ECC RDIMM
This is a 32GB DDR4-3200 registered DIMM with ECC, built to match Dell part SNPHTPJ7C/32G. It runs at 1.2v using a 2Rx8 layout on a 288-pin module. The unit is new and carries a lifetime warranty.
Suited for Dell servers needing validated ECC memory
It fits administrators who want OEM-equivalent modules from major-brand DRAM without paying the vendor premium. Buyers who need non-ECC UDIMMs, faster speeds, or larger single-module capacities should look elsewhere.
Handles 32GB per slot at PC4-25600
The 2Rx8 organisation gives standard registered density for dual-socket platforms. Headroom ends at the module’s 32GB limit and the DDR4-3200 bus; workloads requiring higher bandwidth or more capacity per DIMM will need a different specification.
จุดเด่น
- 32GB DDR4-3200 capacity supports heavy server workloads
- ECC registered design protects data integrity in critical applications
- 2V operation reduces power draw and heat output
- 2Rx8 dual-rank layout maximises memory bandwidth per slot
- 100% Dell compatible module maintains factory warranty coverage
ข้อมูลจำเพาะ
| Brand | Dell |
|---|---|
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
คำถามเกี่ยวกับสินค้านี้
Does my server need DDR4 slots to accept this 288-Pin RDIMM?
Yes, the module fits 288-Pin DDR4 slots and requires a platform that supports DDR4-3200 registered ECC memory.
Can I mix this 2Rx8 registered stick with older unbuffered DDR4 DIMMs in the same system?
No, registered and unbuffered modules cannot operate together; the motherboard must use registered ECC DIMMs for this stick to function.
How do I verify the module runs at the rated 3200 MT/s after installation?
Check the BIOS memory information or use a tool such as dmidecode to confirm the speed shows DDR4-3200 and the rank is reported as 2Rx8.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



