Brute Networks
Brute Networks 370-ADOJ 16GB DDR4-2666 ECC Registered RDIMM
16GB DDR4-2666 ECC Registered RDIMM, Dell 370-ADOJ compatible, 1.2V 2Rx8
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 16GB DDR4-2666 ECC registered memory for server reliability
- 288-pin RDIMM at 1.20V lowers power draw
- 2Rx8 dual-rank layout increases bandwidth
- 100% Dell 370-ADOJ compatible for drop-in upgrades
- Lifetime warranty backed by major-brand chips
Dell Compatible 16GB DDR4-2666 RDIMM
This 16GB DDR4-2666 ECC Registered RDIMM operates at 1.20V with a 2Rx8 rank configuration. It uses a 288-Pin form factor and runs at PC4-21300 speed. The module is built with major brand chipsets and matches Dell part number 370-ADOJ for direct replacement in supported servers.
Suited for ECC Registered memory slots
It suits administrators upgrading or repairing Dell servers that require registered ECC DDR4 memory. Builders needing unbuffered UDIMM modules, non-ECC memory, or capacities beyond 16GB per slot should look at different memory types.
Fits 288-Pin DDR4 registered channels
The RDIMM installs into 288-Pin DDR4 slots wired for registered operation. Its registered buffer reduces electrical load on the memory controller, freeing headroom for larger total system memory configurations. Identical modules fill multi-channel arrays without mixing revisions.
จุดเด่น
- 16GB DDR4-2666 ECC registered memory for server reliability
- 288-pin RDIMM at 1.20V lowers power draw
- 2Rx8 dual-rank layout increases bandwidth
- 100% Dell 370-ADOJ compatible for drop-in upgrades
- Lifetime warranty backed by major-brand chips
ข้อมูลจำเพาะ
| Brand | Dell |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
คำถามเกี่ยวกับสินค้านี้
Does my server need a 288-pin DDR4 slot to accept this 16 GB 2Rx8 registered module?
Yes — the module uses a 288-pin DDR4 form factor and requires a registered ECC slot that supports 1.20 V operation.
Can I add this 2666 MHz stick to a system that already runs slower DDR4 memory?
The module will down-clock to match the slowest installed speed while keeping ECC and registered operation intact.
How do I confirm the BIOS sees the full 16 GB at 2666 MHz with ECC active?
Check the POST memory summary or BIOS setup screen — it should list 16 GB, 2666 MT/s, and show ECC enabled.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



