Brute Networks
Brute Networks 46W0841-BN 32GB DDR4 2133 CL15 ECC LRDIMM 4Rx4 1.20V
32GB DDR4-2133 ECC LRDIMM with CL15 latency and 1.20V operation for IBM-compatible servers
- Capacity32GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 32 GB capacity supports large virtualisation workloads
- DDR4-2133 speed delivers 17000 MT/s data rate
- CL15 latency keeps response times tight
- 20 V operation reduces server power draw
- ECC registered 4Rx4 design protects data integrity
32 GB DDR4-2133 ECC LRDIMM
This 288-pin registered module delivers 32 GB of DDR4 memory at 2133 MT/s with CL15 latency and 1.20 V operation. It uses a 4Rx4 organisation and major-brand DRAM to provide error-correcting code protection for server platforms.
Suited for IBM systems requiring
The stick targets administrators upgrading or repairing compatible IBM servers that accept 2133 MHz registered LRDIMMs. It is not for desktop boards that only support unbuffered UDIMMs, nor for platforms limited to lower capacities or different voltage requirements.
Steady throughput under continuous server workloads
Registered buffering and ECC maintain data integrity during sustained read-write cycles typical of virtualisation or database tasks. The 1.20 V design keeps power draw consistent, while matched major-brand ICs ensure uniform timing across all populated slots.
จุดเด่น
- 32 GB capacity supports large virtualisation workloads
- DDR4-2133 speed delivers 17000 MT/s data rate
- CL15 latency keeps response times tight
- 20 V operation reduces server power draw
- ECC registered 4Rx4 design protects data integrity
ข้อมูลจำเพาะ
| Brand | IBM |
|---|---|
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
คำถามเกี่ยวกับสินค้านี้
Does my server need to support DDR4 2133 and ECC registered LRDIMM for this 32GB module to work?
Yes, the module requires a DDR4 slot that accepts 288-pin ECC registered LRDIMMs running at 2133 MT/s with 1.20V.
Can I mix this 4Rx4 32GB stick with existing 2Rx4 DDR4 2133 modules in the same channel?
Mixing ranks is possible if the server BIOS supports it, but population rules vary by platform; check the system manual for supported rank-per-channel limits.
How can I verify the module is running at PC4-17000 CL15 after installation?
Enter the BIOS or use an OS tool such as dmidecode to confirm the reported speed is 2133 MT/s, voltage 1.20V, and CAS latency 15.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



