Brute Networks
Brute Networks 8GB DDR4-2400 ECC SODIMM 2Rx8 1.2V 4X70Q27988-BN
8 GB DDR4-2400 ECC SODIMM with CL15 latency and 1.2 V operation for compatible Lenovo servers
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- ECC protection for data integrity in critical workloads
- DDR4-2400 speed rated at PC4-19200 bandwidth
- Dual-rank 2Rx8 organisation for higher density per slot
- 20 V operation reduces power draw in dense servers
- Validated Lenovo compatible with major-brand Samsung, SK Hynix or Micron chips
Lenovo-compatible DDR4-2400 ECC SODIMM
This 8 GB DDR4-2400 module is built for Lenovo servers and workstations that require ECC protection. The unregistered 2Rx8 design operates at 1.2 V and meets the original manufacturer specifications for drop-in upgrades.
CL15 latency at continuous throughput
The module runs at PC4-19200 speed with a CAS latency of 15 cycles. Major-brand DRAM chips from Samsung, SK Hynix or Micron are tested to maintain rated frequency under sustained workloads without throttling.
288-pin SODIMM form factor for dense slots
The standard 288-pin layout fits compatible Lenovo memory bays directly. Matched modules ship together to avoid timing mismatches, and the lifetime guarantee covers the part for the service life of the system.
จุดเด่น
- ECC protection for data integrity in critical workloads
- DDR4-2400 speed rated at PC4-19200 bandwidth
- Dual-rank 2Rx8 organisation for higher density per slot
- 20 V operation reduces power draw in dense servers
- Validated Lenovo compatible with major-brand Samsung, SK Hynix or Micron chips
ข้อมูลจำเพาะ
| Brand | Lenovo |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
คำถามเกี่ยวกับสินค้านี้
How much heat and power does the 1.20V DDR4-2400 ECC SODIMM produce when running continuously in a server?
Operating at 1.20 volts, this DDR4 module draws minimal power and generates low heat, helping keep thermal headroom available for the CPU and other components during all-day workloads.
What must the system already provide for this 288-pin DDR4 ECC SODIMM to function?
The motherboard needs a DDR4 SODIMM slot that supports ECC unregistered memory at 2400 MT/s and a BIOS that enables ECC operation.
Will this 2Rx8 PC4-19200 module work alongside older DDR4 sticks that are single-rank or slower?
Yes, it will run at the speed and timings of the slowest installed module; mixing ranks is supported but the system will operate in single-channel mode unless paired identically.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



