Brute Networks
Brute Networks 8GB DDR4-3200 PC4-25600 1Rx16 Non-ECC UDIMM server RAM
8GB DDR4-3200 UDIMM module, 1Rx16 non-ECC, runs at 1.20V and is 100% Dell compatible
- Capacity8GB
- Voltage1.20V
- Rank1Rx16
- ChipsetMajor Brand Chipset
- 8GB capacity adds memory headroom for virtualisation workloads
- DDR4-3200 speed delivers 25600 MT/s bandwidth for data-intensive tasks
- 20V operation reduces power draw per module
- 1Rx16 single-rank layout keeps signal integrity clean
- 100% Dell compatibility ensures drop-in installation in qualified systems
Dell-compatible server upgrade
Brute Networks SNP9CXF2C/8G-BN is an 8 GB DDR4 UDIMM built to match Dell part number SNP9CXF2C/8G. It targets administrators who need a direct-replacement module for supported Dell servers and workstations. The stick is not for buyers who require ECC error correction or registered buffering.
Low-voltage DDR4 operation
The module runs at 1.20 V and is rated for PC4-25600 speeds at 3200 MT/s. Standard DDR4 signalling keeps power draw and heat output in line with typical unbuffered server memory. No active cooling or special airflow is required beyond normal chassis ventilation.
Third-party compatibility assurance
Brute Networks validates the DIMM for 100 % Dell compatibility and backs it with a lifetime warranty. The single-rank 1Rx16 organisation uses major-brand chipsets to meet Dell-qualified timing and density requirements. No additional software, drivers or configuration utilities are bundled.
จุดเด่น
- 8GB capacity adds memory headroom for virtualisation workloads
- DDR4-3200 speed delivers 25600 MT/s bandwidth for data-intensive tasks
- 20V operation reduces power draw per module
- 1Rx16 single-rank layout keeps signal integrity clean
- 100% Dell compatibility ensures drop-in installation in qualified systems
ข้อมูลจำเพาะ
| Brand | Dell |
|---|---|
| Capacity | 8GB |
| Voltage | 1.20V |
| Rank | 1Rx16 |
| Chipset | Major Brand Chipset |
คำถามเกี่ยวกับสินค้านี้
How do I install the 1Rx16 DDR4 UDIMM, and which step do people get wrong?
Align the notch on the module with the slot key, press straight down until both side clips click, then verify the system reports the full 8 GB at 3200 MT/s.
What maintenance or replacement will the 8 GB DDR4-3200 module need later?
No routine maintenance is required; if errors appear, run a memory diagnostic and replace the stick if it fails.
What limit appears first when the 1.20 V DDR4 module runs under sustained load?
The JEDEC-rated 3200 MT/s speed is the ceiling; the module will not exceed that frequency without manual overclocking.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



