Brute Networks
Brute Networks T01NN Dell Compatible 16GB DDR4-2666 ECC Registered RDIMM 2Rx8 1.2V
A 16GB DDR4-2666 ECC registered RDIMM with 2Rx8 organisation and 1.2V operation for Dell servers
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- Dell-compatible upgrade validated by 100% compatibility testing
- 16 GB capacity expands server memory headroom
- DDR4 2666 speed matches PC4-21300 spec
- ECC registered design protects data integrity
- 2 V operation reduces power draw
Dell Compatible 16GB DDR4 Server Memory
Brute Networks T01NN is a 16GB DDR4-2666 ECC registered RDIMM built to match Dell part number T01NN. It uses major-brand chips from Samsung, SK Hynix or Micron and carries a lifetime warranty from the supplier. The module runs at 1.2V with a 2Rx8 rank configuration.
Who This Suits And Who Should Look Elsewhere
System administrators upgrading or repairing Dell servers that require PC4-21300 registered ECC memory will find this module a direct fit. Buyers who need non-ECC unbuffered DIMMs, higher capacities or different speeds should look elsewhere because this part is fixed at 16GB, 2666 MT/s and registered ECC.
What To Check Before Ordering
Verify that your Dell server accepts 288-pin DDR4 registered ECC RDIMMs and supports the 2Rx8 organisation at 2666 MT/s. Confirm the motherboard can populate the required number of slots with identical modules for multi-channel operation. Ensure the system BIOS is current enough to recognise the memory configuration.
จุดเด่น
- Dell-compatible upgrade validated by 100% compatibility testing
- 16 GB capacity expands server memory headroom
- DDR4 2666 speed matches PC4-21300 spec
- ECC registered design protects data integrity
- 2 V operation reduces power draw
ข้อมูลจำเพาะ
| Brand | Dell |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
คำถามเกี่ยวกับสินค้านี้
Does my server need a 288-pin DDR4 slot to install this 16GB module?
Yes, this RDIMM uses the standard 288-pin DDR4 form factor and requires a matching registered DIMM slot on the motherboard.
Will this 2666MHz ECC registered stick run at its rated speed if I keep slower DDR4 modules in the other slots?
The memory controller will downclock all installed modules to the lowest common speed, so the 2666MHz rating applies only when every populated slot supports that frequency.
How can I confirm the 16GB 2Rx8 module is recognised correctly after installation?
Check the system BIOS or operating system memory report; it should show 16GB per module, DDR4-2666 speed, ECC active and registered operation.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



