ColorCoral SCB001 1200ml Collapsible Silicone Dining Bowl
- Salad Bowls
- 4.9 cm x 18.8 cm x…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Queen-size inflatable mattress with a built-in electric pump, 15-inch thickness and a 600-pound weight capacity for firm, portable sleep
This CANMOV queen air mattress measures 78 inches by 60 inches with a 15 inch thickness. A built-in pump inflates the PVC bladder on a standard 110120V outlet. The coil support system provides a firm feel rated for a maximum 600 pounds. Weighing 7.94 kilograms, it includes a carry bag for transport.
The mattress suits occasional home guests and portable travel where quick inflation and firm support are needed. The 15 inch height eases entry and exit. Buyers needing a permanent bed replacement or a softer comfort layer should look at alternative sleep surfaces that do not require periodic air top-ups.
The single specification that decides fit is the integrated pump requiring a 110120V AC outlet. Without access to mains power the mattress cannot self-inflate, making it unsuitable for remote off-grid camping unless an external power source is available.
| Brand | CANMOV |
|---|---|
| Model | queen air mattress |
| Part Number | 83210 |
| Thickness | 15 inches |
| Bed Size | Queen |
| Comfort | Firm |
| Cushioning Material | Cotton |
| Weight | 7.94 kilograms |
| Coil Support | Open Coil |
| Material | Vinyl |
Yes, the integrated pump requires a standard 110-120V AC outlet; it will not operate on battery power or a vehicle 12V socket.
The PVC bladder with coil-beam support works on any flat, clean surface including slatted frames, provided gaps are small enough to prevent sagging.
Inflate fully, close both valves tightly, wait 8-12 hours for seams to settle, then verify the surface remains firm without noticeable sagging.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม