Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR3 10600 1333MHz NON ECC SODIMM memory upgrade for HP G62-367Dx
DDR3 SODIMM kit adds 8 GB across two 4 GB modules at 1333 MHz CL7 for compatible HP G62 notebooks
- Capacity8GB (2 x 4GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL7
- Timing7-7-7
- Voltage1.5V
- 8GB dual-channel kit boosts multitasking on compatible HP G62 notebooks
- DDR3-1333 CL7 timing delivers responsive system performance
- 5V unbuffered non-ECC modules install without configuration
- 204-pin SODIMM form factor fits the G62 memory slots directly
- Major-brand chipset ensures reliable operation across supported models
Computer Memory Solutions 8GB DDR3 SODIMM kit
This kit contains two 4GB DDR3 SO-DIMM modules rated at 1333MHz (PC3-10600) with CL7 timing and 1.5V operation. It is built for HP G62 notebooks including the 367Dx, 371Dx and 372Us models where the memory bus may run at 1066MHz depending on the processor installed.
Sustained load behaviour on DDR3 1333 SO-DIMM
The modules use unbuffered, non-ECC major-brand chips in a 2Rx8 organisation. Under continuous workloads they operate at standard JEDEC voltage without a heat spreader, so thermal headroom depends on the notebook chassis airflow rather than module cooling.
Installing the 204-pin DDR3 pair
Both sticks are inserted into the two SODIMM slots accessible under the service panel. If a 32-bit operating system is used the system will recognise a maximum of 4GB, and Intel GL40 chipset models are limited to 4GB total regardless of OS. A 64-bit OS is required to address the full 8GB capacity.
จุดเด่น
- 8GB dual-channel kit boosts multitasking on compatible HP G62 notebooks
- DDR3-1333 CL7 timing delivers responsive system performance
- 5V unbuffered non-ECC modules install without configuration
- 204-pin SODIMM form factor fits the G62 memory slots directly
- Major-brand chipset ensures reliable operation across supported models
ข้อมูลจำเพาะ
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126410600SODRH |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL7 |
| Timing | 7-7-7 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp G Notebook G62-367Dx, G62-371Dx, G62-372Us |
| Package Content | 2 Memory RAM Sticks |
คำถามเกี่ยวกับสินค้านี้
How much power does this 1.5 V DDR3 kit draw when the notebook runs all day?
The modules operate at the standard 1.5 V DDR3 voltage, so power draw matches typical 1333 MHz SO-DIMM levels; the notebook's own cooling and battery management handle the load.
What must the HP G62 notebook already have for these two 204-pin sticks to work?
Two free DDR3 SO-DIMM slots and a 64-bit operating system to address the full 8 GB; a 32-bit OS will only see about 3.5 GB.
Will the memory bus drop to 1066 MHz if I keep the original processor in my G62-367Dx?
Yes, HP documentation notes the bus may run at 1066 MHz (PC3-8500) depending on the installed processor, so the kit will downclock automatically.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



