Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR3 1333MHz CL9 1.5V Non-ECC DIMM memory upgrade
8GB DDR3 kit (2×4GB, 1333 MHz, CL9, 1.5 V) validated for HP Business Desktop 4000 Pro, 500B and 505B systems
- Capacity8GB (2 x 4GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 8GB dual-channel kit boosts multitasking with two matched 4GB modules
- 1333MHz DDR3 speed matches HP desktop bus for stable performance
- CL9 1.5V timing runs cool without extra voltage or heat spreaders
- Validated for HP 4000 Pro, 500B, 505B and listed business desktops
- 240-pin unbuffered non-ECC DIMMs install directly into standard desktop slots
System-specific DDR3 upgrade for HP desktops
This 8GB kit from Computer Memory Solutions targets owners of HP Business Desktop 4000 Pro, 500B and 505B systems who need more memory for everyday workloads. The two 4GB modules arrive as a matched pair and carry a limited lifetime warranty from the manufacturer.
DDR3-1333 CL9 1.5V unbuffered non-ECC
The kit runs at DDR3 1333 (PC3 10600) with CL9 9-9-9 timing at 1.5V. Each stick is a 240-pin 2Rx8 DIMM without a heat spreader, built on major-brand components and validated for the listed HP platforms.
Dual-channel pair for four-slot boards
The motherboard provides four DIMM slots; modules may be installed one at a time but must be added in like pairs to enable dual-channel operation. A 64-bit operating system is required to address the full 8GB, otherwise the system may report 3.5GB or less. The memory bus operates at 1066MHz per HP documentation. Buyers needing ECC, registered modules or capacities beyond 8GB should look elsewhere.
จุดเด่น
- 8GB dual-channel kit boosts multitasking with two matched 4GB modules
- 1333MHz DDR3 speed matches HP desktop bus for stable performance
- CL9 1.5V timing runs cool without extra voltage or heat spreaders
- Validated for HP 4000 Pro, 500B, 505B and listed business desktops
- 240-pin unbuffered non-ECC DIMMs install directly into standard desktop slots
ข้อมูลจำเพาะ
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126410600DIMM |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp Business Desktop 4000 Pro, 500B, 505B |
| Package Content | 2 Memory RAM Sticks |
คำถามเกี่ยวกับสินค้านี้
Will the 1333 MHz modules actually run at that speed in my HP 4000 Pro?
HP documentation states the memory bus runs at 1066 MHz, so these DDR3-1333 modules will operate at the lower 1066 MHz speed once installed.
Does the PC3-10600 rating match the motherboard's DDR3 slot specification?
Yes, PC3-10600 is the standard designation for DDR3-1333, and the 240-pin DIMM form factor fits the DDR3 slots in the listed HP Business Desktop models.
Will the two 4 GB sticks fit the four DIMM sockets in my 500B Microtower?
The kit provides two 240-pin DIMMs; the system has four sockets and requires modules to be added in like pairs for dual-channel operation, so this pair occupies one channel.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



