Computer Memory Solutions
Computer Memory Solutions CM1024642133DIMM 8GB DDR4 2133MHz CL15 1.2V 2Rx8 memory upgrade
8GB DDR4 2133MHz CL15 1.2V unbuffered DIMM validated for Dell OptiPlex 3050 SFF and Tower systems
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Timing15-15-15
- Voltage1.2V
- 8GB DDR4 boosts multitasking on OptiPlex 3050
- CL15 timing at 2133MHz keeps response snappy
- 2V operation cuts power draw and heat
- 288-pin unbuffered DIMM fits straight into the slot
- Guaranteed compatibility with Dell OptiPlex 3050 SFF/Tower
Dell OptiPlex 3050 memory upgrade
This 8 GB DDR4 module is built for the Dell OptiPlex 3050 SFF and Tower. It runs at 2133 MHz with CL15 timing and 1.2 V operation. The unbuffered, non-ECC design matches the factory specification for these desktops.
Simple DIMM installation
The 288-pin stick fits the standard DDR4 slots on the OptiPlex 3050 motherboard. No heat spreader is present, so clearance inside the small-form-factor chassis is not a concern. Handle the module by its edges and press firmly until the retention clips click.
Check your current configuration
The system supports a maximum of 32 GB across two slots. Verify how many modules are already installed and whether the total will stay within that limit. Ensure the BIOS is up to date so the new stick is recognised at its rated speed.
จุดเด่น
- 8GB DDR4 boosts multitasking on OptiPlex 3050
- CL15 timing at 2133MHz keeps response snappy
- 2V operation cuts power draw and heat
- 288-pin unbuffered DIMM fits straight into the slot
- Guaranteed compatibility with Dell OptiPlex 3050 SFF/Tower
ข้อมูลจำเพาะ
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM1024642133DIMM |
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Timing | 15-15-15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell OptiPlex 3050 SFF / Tower |
| Package Content | 1 Memory RAM Stick |
คำถามเกี่ยวกับสินค้านี้
How can I verify the module is running at 2133 MHz with CL15 timing after installation?
Enter the system BIOS or use a tool such as CPU-Z; the memory tab should show 2133 MHz speed and 15-15-15 timings at 1.2 V.
What does the package contain and is anything else required for the OptiPlex 3050?
The box includes one 8 GB 288-pin DDR4 DIMM; no extra parts are needed if a free slot exists in the OptiPlex 3050 SFF or Tower.
Should I choose the single 8 GB stick or add a second to reach the 32 GB maximum?
The OptiPlex 3050 supports up to 32 GB across two sockets; one 8 GB module works alone, and a second identical stick can be added later for dual-channel performance.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



