Computer Memory Solutions
Computer Memory Solutions CM1024642400DIMM 16GB (2x8GB) DDR4 2400 CL17 1.2V 288-pin
A 16 GB DDR4 2400 MHz dual-channel kit validated for HP EliteDesk 705 G3 and 800 G2/G3 desktops
- Capacity16GB (2 x 8GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Timing17-17-17
- Voltage1.2V
- 16 GB dual-channel kit boosts multitasking headroom
- CL17 timing at 2400 MHz keeps latency low
- 2 V DDR4 modules reduce power draw
- Validated for HP EliteDesk 705 G3 and 800 G2/G3
- Lifetime exchange warranty from Computer Memory Solutions
System-Specific DDR4 Kit
This 16 GB kit contains two 8 GB DDR4 2400 modules built for HP EliteDesk 705 G3 and 800 G2/G3 towers and small-form-factor units. It targets IT teams and owners of those exact models who need a straightforward capacity increase.
Guided Installation
The 288-pin DIMMs slot into the four native sockets without tools or BIOS changes on the listed platforms. Builders who need ECC, registered buffers or speeds above 2400 MHz will find this kit unsuitable for their workload.
DDR4 2400 Platform Ceiling
The EliteDesk memory controller caps transfer rates at 2400 MT/s, so faster modules would downclock to this speed. Total capacity stops at 64 GB across the four slots, limiting configurations that require more memory.
จุดเด่น
- 16 GB dual-channel kit boosts multitasking headroom
- CL17 timing at 2400 MHz keeps latency low
- 2 V DDR4 modules reduce power draw
- Validated for HP EliteDesk 705 G3 and 800 G2/G3
- Lifetime exchange warranty from Computer Memory Solutions
ข้อมูลจำเพาะ
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM1024642400DIMM |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | HP/Compaq EliteDesk 705 G3 MT/SFF, EliteDesk 800 G2 Series Tower/SFF, EliteDesk 800 G3 Series Tower/SFF |
| Package Content | 2 Memory RAM Sticks |
คำถามเกี่ยวกับสินค้านี้
How can I confirm the 2400 MHz DDR4 kit is running at its rated speed after installing it in my EliteDesk 800 G3 Tower?
Enter the BIOS or use a tool such as CPU-Z and verify the memory frequency reads 2400 MHz with timings of 17-17-17 at 1.2 V.
What exactly ships in the box and is anything else required to complete the upgrade?
The package contains two 8 GB unbuffered 288-pin DIMM modules; no additional parts or cables are needed for the supported HP EliteDesk systems.
Should I choose the 16 GB (2×8 GB) kit or a different capacity for my EliteDesk 705 G3 SFF?
The 16 GB kit fills two of the four slots and leaves room to reach the 64 GB maximum later; select it if 16 GB meets your current workload.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



