Computer Memory Solutions
Computer Memory Solutions CM2566410600SODRH 4GB (2x2GB) DDR3 1333MHz SODIMM memory upgrade
4 GB kit of two 2 GB DDR3 1333 MHz SODIMM modules for 27-inch iMac Mid 2011
- Capacity4GB (2 x 2GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL7
- Timing7-7-7
- Voltage1.5V
- 4GB kit boosts iMac responsiveness with two 2GB DDR3 1333MHz modules
- CL7 timing and 1.5V operation deliver stable performance for Mid 2011 27-inch iMac
- 204-pin SODIMM form factor fits the four-slot architecture supporting up to 32GB total
- Unbuffered non-ECC design matches factory specifications for 3.4GHz quad-core Intel Core i7
- Major-brand chipset and CMS lifetime warranty ensure reliable long-term operation
System-specific DDR3 SODIMM kit
This 4 GB kit contains two 2 GB DDR3 1333 MHz SO-DIMM modules built to PC3-10600 specification. They are validated for the Apple iMac 27-inch Mid 2011 with a 3.4 GHz quad-core Intel Core i7 processor and use the standard 204-pin DDR3 form factor.
Suitable for owners of that exact iMac model
The modules are unbuffered, non-ECC and run at 1.5 V with CL7 timing. Buyers with a different iMac year, screen size or processor should look elsewhere because the kit is qualified only for the Mid 2011 27-inch 3.4 GHz quad-core i7 configuration.
Two-slot kit for a four-slot machine
The iMac ships with 4 GB installed across two slots and offers four slots in total with a 32 GB maximum. This pair fills the two free slots, raising the total to 8 GB without removing the original memory.
จุดเด่น
- 4GB kit boosts iMac responsiveness with two 2GB DDR3 1333MHz modules
- CL7 timing and 1.5V operation deliver stable performance for Mid 2011 27-inch iMac
- 204-pin SODIMM form factor fits the four-slot architecture supporting up to 32GB total
- Unbuffered non-ECC design matches factory specifications for 3.4GHz quad-core Intel Core i7
- Major-brand chipset and CMS lifetime warranty ensure reliable long-term operation
ข้อมูลจำเพาะ
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2566410600SODRH |
| Capacity | 4GB (2 x 2GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL7 |
| Timing | 7-7-7 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple Imac 3.4Ghz Quad-Core Intel-Core I7 27" Mid 2011 |
| Package Content | 2 Memory RAM Sticks |
คำถามเกี่ยวกับสินค้านี้
Should I buy the 4GB kit or add a single 2GB module instead?
This kit supplies two matched 2GB modules totalling 4GB and is the simplest way to reach the 32GB maximum across four slots on the compatible iMac.
Will the 1333MHz rating run at that speed once installed?
The modules are rated PC3-10600 at 1333MHz with CL7 timing and will operate at that frequency in the supported iMac.
Does the 204-pin DDR3 SO-DIMM interface limit the bandwidth I can use?
The 204-pin DDR3 SO-DIMM form factor carries the PC3-10600 signal, capping throughput at the 1333MHz data rate specified for this kit.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



