Corn Electronics GR701 E-ATX PC Case Stay Night 420 mm Radiator 4×140 mm Fans
- ATX Full Tower
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Corn Electronics
Full-tower case supporting E-ATX boards, dual 420 mm radiators, four pre-installed 140 mm fans, vertical GPU mount and 60 W USB-C charging
Options Cyberpunk
ตัวเลือกที่ขีดฆ่าไว้มีอยู่จริง แต่ไม่มีจำหน่ายที่นี่
The Corn Electronics GR701 is a full-tower chassis that accepts E-ATX boards up to 12 by 10.9 inches alongside ATX, Micro-ATX and Mini-ITX. Four 140 mm PWM fans come pre-installed and an ARGB hub handles lighting control. Dual tempered-glass panels show the interior while a metal GPU holder supports cards up to 460 mm long.
Builders moving up from cases that max out at 360 mm radiators gain front and top mounts for 420 mm units plus a rear 140 mm slot. Nine horizontal expansion slots and three additional vertical slots give room for thick cards or riser cables. The 34 mm cable-management channel and combo drive bays swallow the clutter that smaller enclosures force outside.
Removable dust filters on front, top and bottom panels simplify cleaning, and the pre-wired fan hub reduces cable runs. The case weighs 20.8 kg so two people should position it; the 240 mm power-supply limit means some longer units will not fit. Custom UV printing is permanent, so confirm the Cyberpunk Yellow artwork before ordering.
| Model | international version |
|---|---|
| Type | ATX Full Tower |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The case fits a CPU cooler up to 190 mm tall and a graphics card up to 460 mm long.
Remove the magnetic dust filters, unscrew the fan frames from the front and rear rails, then reverse the steps to mount replacements.
Pull each magnetic filter out, rinse with water or brush off dust, dry fully, then snap it back onto the frame.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม