EVGA
EVGA 600 W1 600 W power supply
A 600 W ATX power supply with 80 Plus efficiency, 12 V rail and fixed cables including 24 pin, 4+4 CPU, 6+2 PCIe and SATA connectors
- Maximum Power600 W
- Input Voltage100 - 240 V
- Dimensions7x7x6
- Weight4
- Rear Fans Noise Level24-26dBA Typical
- Over Temperature Protection0° to 40° C
- 600 W output delivers stable power for mid-range builds
- 80 Plus certification reduces energy waste and heat
- Quiet 24-26 dBA fan keeps noise low under load
- Universal 100-240 V input works worldwide without a switch
- ATX form factor fits standard cases with full connector set
Core specification
The EVGA 600 W1 is a 600 W ATX power supply rated for 80 Plus efficiency. It accepts 100-240 V input and delivers up to 20 A on the primary side. A non-modular cable set includes 24-pin ATX, 4+4 CPU, 6-pin and 6+2-pin PCIe, SATA, peripheral and floppy connectors.
Who this suits
Builders assembling a basic office or entry-level gaming PC with a single mid-range graphics card will find the wattage and connector mix adequate. Buyers who need fully modular cabling, higher efficiency ratings or support for multiple high-power GPUs should look at other units.
Deciding specification
The single figure that determines fit is the 600 W maximum output; if the total system draw under load stays below this limit the unit will work, otherwise a higher-capacity supply is required.
จุดเด่น
- 600 W output delivers stable power for mid-range builds
- 80 Plus certification reduces energy waste and heat
- Quiet 24-26 dBA fan keeps noise low under load
- Universal 100-240 V input works worldwide without a switch
- ATX form factor fits standard cases with full connector set
ข้อมูลจำเพาะ
| Brand | EVGA |
|---|---|
| Model | 100-W1-0600-K1 |
| Maximum Power | 600 W |
| Input Voltage | 100 - 240 V |
| Dimensions | 7x7x6 |
| Weight | 4 |
| Rear Fans Noise Level | 24-26dBA Typical |
| Over Temperature Protection | 0° to 40° C |
คำถามเกี่ยวกับสินค้านี้
How do I install the 24-pin ATX and 4+4 CPU cables on the EVGA 600 W1, and what step is often missed?
Connect the 24-pin motherboard cable and the 4+4 CPU cable firmly until they click; the step often missed is seating the 4+4 CPU plug fully into the motherboard's 8-pin socket so the latch engages.
What maintenance or replacement will the EVGA 600 W1 need later?
The internal fan is the only moving part; clean dust from the intake grille periodically and replace the unit if fan noise rises above the typical 24-26 dBA range.
At what point does the EVGA 600 W1 hit its limit under sustained load?
Continuous output is rated at 600 W; exceeding that or operating above 40 °C ambient triggers over-temperature protection and shuts the unit down.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



