เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

Fans

Fans 2408NL-09W-B39 6020 28V 0.05A case fan

SKU CH-T7ZW-HCYE4 MPN 2408NL-09W-B39

A 60 mm square axial fan spins at 2300 rpm on double ball bearings using 28 V and 0.05 A

  • Reliable long-life operation from double ball bearing
  • Efficient 28 V 0.05 A power draw
  • Compact 60×60×20 mm fits tight spaces
  • Steady 2300 rpm airflow for consistent cooling
  • Ready for medical, rail, industrial and EV use

Compact 28V Inverter Cooling Fan

The NMB 2408NL-09W-B39 is a 60x60x20 mm axial fan built for inverter and industrial cooling. It runs on 28 V at 0.05 A and spins at 2300 rpm. Buyers who need a 12 V or PWM-controlled case fan cannot use this model.

Double Ball Bearing With Three-Wire Lead

A double ball bearing supports continuous operation in medical, rail and new-energy vehicle equipment. The 10 cm three-wire harness provides power, ground and speed signal connections. Builders looking for a standard four-pin PWM header will find the connector incompatible.

2300 RPM At 28 Volts

The single decisive specification is the 28 V / 2300 rpm rating, which dictates both airflow and power-supply requirements. Systems that supply only 12 V or 24 V will not drive this fan to its rated speed. Verify the voltage rail before ordering.

จุดเด่น

  • Reliable long-life operation from double ball bearing
  • Efficient 28 V 0.05 A power draw
  • Compact 60×60×20 mm fits tight spaces
  • Steady 2300 rpm airflow for consistent cooling
  • Ready for medical, rail, industrial and EV use

ข้อมูลจำเพาะ

ยังไม่มีข้อมูลจำเพาะที่เผยแพร่สำหรับสินค้านี้

คำถามเกี่ยวกับสินค้านี้

What connector standard does the 3-wire lead use?

The fan has a 3-wire lead 10 cm long for 28 V power and speed signal.

What are the mounting hole dimensions for the 6020 frame?

The frame measures 60 x 60 x 20 mm with standard 60 mm square mounting centres.

How do I wire the three leads correctly?

Connect red to 28 V, black to ground, and the third wire to the tachometer input; reversing power will not spin the double ball bearing motor.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที