Foxconn
Foxconn HH-400UNEA 300 W ATX12V 2.2 power supply
A 300 W ATX12V 2.2 unit with dual 12 V rails, a 20+4 pin main connector, two SATA plugs and a 100,000 hour MTBF rating
- TypeATX12V Ver2.2
- Maximum Power300 W
- Fans1
- Main Connector20+4Pin
- +12V Rails2
- PCI-Express ConnectorNo
- Reliable 300 W output for standard desktop builds
- Dual +12 V rails deliver stable power to CPU and peripherals
- Broad 115 / 230 V input suits worldwide mains
- 20+4 pin main connector fits modern and legacy motherboards
- MTBF over 100000 hours indicates long service life
Entry-level 300 W ATX12V 2.2 unit
The Foxconn HH-400UNEA delivers 300 W through dual +12 V rails rated at 11 A and 15 A. It targets basic office builds or replacement jobs where a PCI-Express power lead is not required.
Fixed cable set shapes installation
A 20+4 pin main connector, one 12 V P4 lead, three peripheral plugs, two SATA headers and a floppy connector are permanently attached. The non-modular layout means unused cables stay in the case and must be routed around other components.
ATX12V 2.2 spec caps expansion
The 2.2 standard limits combined +12 V output and omits native PCI-Express power, so graphics cards needing a six-pin or eight-pin feed cannot be used. Input range covers 115 V and 230 V at 50/60 Hz for worldwide mains compatibility.
จุดเด่น
- Reliable 300 W output for standard desktop builds
- Dual +12 V rails deliver stable power to CPU and peripherals
- Broad 115 / 230 V input suits worldwide mains
- 20+4 pin main connector fits modern and legacy motherboards
- MTBF over 100000 hours indicates long service life
ข้อมูลจำเพาะ
| Brand | Foxconn |
|---|---|
| Model | HH-400UNEA |
| Type | ATX12V Ver2.2 |
| Maximum Power | 300 W |
| Fans | 1 |
| Main Connector | 20+4Pin |
| +12V Rails | 2 |
| PCI-Express Connector | No |
| SLI | No |
| CrossFire | No |
| Modular | No |
| Input Voltage | 115 / 230 V |
| Input Frequency Range | 50/60 Hz |
| Input Current | 8A @ 115V, 4A @ 230V |
| Output | +3.3V@21A,+5V@18A,+12V1@11A,+12V2@15A, [email protected] , [email protected] |
| MTBF | >100,000 Hours |
| Approvals | UL, CUL, CSA, TUV, CB, BSMI |
| Connectors | 1 x Main connector (20+4Pin) 1 x 12V(P4) 3 x peripheral 2 x SATA 1 x Floppy |
| น้ำหนักในการจัดส่ง | 1.52 kg |
| ขนาดบรรจุภัณฑ์ | 210 × 203 × 102 mm |
คำถามเกี่ยวกับสินค้านี้
How long is the unit rated to run before a failure becomes likely?
The mean time between failures is rated at more than 100,000 hours of operation.
Which rail hits its current ceiling first when the load stays high?
The +12V1 rail is limited to 11 A, so it reaches its maximum before the +12V2 rail at 15 A.
How much heat and noise should I expect from the single fan during continuous use?
With a 300 W maximum output and one non-modular fan, sustained loads will push the fan to higher speeds, increasing both airflow noise and exhaust temperature.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



