เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

Graviton

Graviton FSP180-50PLA 180W 200-240V 1U server power supply

SKU CH-YRGB-S4623

Delivers 180W at 12V for 1U servers, operating on 200-240V input with non-modular cabling

  • 180W output powers dense 1U servers
  • 200-240V input suits data-centre racks
  • 12V rail delivers stable component voltage
  • 1U form factor fits slim chassis
  • 80 PLUS certification ensures efficient operation

1U server power supply

The Graviton FSP180-50PLA is a non-modular 180W unit built for 1U server chassis. It accepts 200-240V input and provides a single 12V output rail for compatible platforms.

Upgrading from lower-wattage 1U units

This supply replaces older 1U power supplies rated below 180W when the system demands more headroom. The jump is worthwhile when the existing unit cannot sustain the 12V load required by the installed components.

Suits 1U server builds needing 180W on 12V

It fits administrators maintaining or assembling 1U servers that operate on 200-240V mains and require a fixed-cable 180W design. Builders needing modular cabling, lower input voltage support or power above 180W should look at other form factors.

จุดเด่น

  • 180W output powers dense 1U servers
  • 200-240V input suits data-centre racks
  • 12V rail delivers stable component voltage
  • 1U form factor fits slim chassis
  • 80 PLUS certification ensures efficient operation

ข้อมูลจำเพาะ

ยังไม่มีข้อมูลจำเพาะที่เผยแพร่สำหรับสินค้านี้

คำถามเกี่ยวกับสินค้านี้

Does the FSP180-50PLA fit a 1U server chassis?

Yes, the FSP180-50PLA is designed for 1U server installations.

What wiring step is often missed when installing this non-modular unit?

Route all fixed cables before securing the supply, since none can be detached later.

When should the internal fan be cleaned on this 180W supply?

Clean the fan intake every 6 to 12 months to maintain airflow at 200-240V input.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที