เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

HP

HP Samsung 8GB DDR4-2666 CL19 260-pin SODIMM M471A1K43CB1-CTD L04439-501

SKU CH-RZW4-BMKZF

An 8 GB DDR4-2666 SODIMM with CL19 timing and 1.2 V operation for laptop upgrades

  • Type260-Pin DDR4 SO-DIMM
  • 8 GB capacity expands laptop multitasking headroom
  • DDR4-2666 speed delivers responsive data throughput
  • CL19 latency keeps timing tight
  • 2 V operation reduces power draw
  • 260-pin SO-DIMM fits standard laptop slots

8 GB DDR4-2666 laptop module

This 8 GB DDR4-2666 SODIMM upgrades notebooks that accept 260-pin unbuffered memory. It suits owners who need extra capacity for everyday multitasking or a direct replacement for a failed stick.

CL19 timing at 1.2 V

The module runs at CL19 latency with a standard 1.2 V supply. Its 260-pin SO-DIMM edge connector fits the DDR4 slots found in compatible laptops, so installation is a simple push-in action.

DDR4-2666 bandwidth ceiling

The PC4-21300 interface caps throughput at the DDR4-2666 data rate. Systems limited to lower memory speeds will down-clock the module, while workloads needing higher bandwidth or ECC protection must look elsewhere.

จุดเด่น

  • 8 GB capacity expands laptop multitasking headroom
  • DDR4-2666 speed delivers responsive data throughput
  • CL19 latency keeps timing tight
  • 2 V operation reduces power draw
  • 260-pin SO-DIMM fits standard laptop slots

ข้อมูลจำเพาะ

Type260-Pin DDR4 SO-DIMM

คำถามเกี่ยวกับสินค้านี้

What speed does the DDR4-2666 interface actually run at in a laptop?

The module is rated for 2666 MT/s (PC4-21300) and will operate at that speed if the platform supports it; otherwise it down-clocks to the highest speed the memory controller allows.

What physical slot does the 260-pin SO-DIMM require?

It fits a standard 260-pin DDR4 SO-DIMM socket, which is keyed differently from older 204-pin sockets to prevent incorrect insertion.

Which orientation step do people often miss when seating the stick?

Align the notch on the module edge with the key in the slot, insert at roughly 30 degrees, then press down firmly until both side clips click into the notches on the PCB.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที