IBM
IBM 81Y9886 3TB 7200 RPM SAS 6Gb/s 3.5" internal hard drive
3 TB SAS 6 Gb/s internal drive spins at 7200 rpm in a 3.5 inch form factor
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity3TB
- RPM7200 RPM
- Average Latency6Gb/s
- UsageIdeal for Servers
- 3 TB capacity stores large datasets
- 7200 RPM spindle delivers responsive data access
- SAS 6Gb/s interface supports reliable server connectivity
- 5-inch form factor fits standard drive bays
- New bare drive ready for immediate installation
IBM 3TB SAS Internal Hard Drive
The IBM 81Y9886 is a 3TB 3.5 inch internal hard drive with a SAS 6Gb/s interface spinning at 7200 RPM. It arrives as a bare drive and is built for server environments that demand high-capacity storage.
Suited for servers needing bulk SAS storage
This drive suits administrators expanding array capacity in systems equipped with SAS backplanes and controllers. It is not for workstations or enclosures that lack a SAS host bus adapter or the physical 3.5 inch drive bays required for installation.
SAS 6Gb/s interface compatibility
The single specification that decides fit is the SAS 6Gb/s interface; the drive will only operate when connected to a compatible SAS controller or backplane supporting that signalling standard.
จุดเด่น
- 3 TB capacity stores large datasets
- 7200 RPM spindle delivers responsive data access
- SAS 6Gb/s interface supports reliable server connectivity
- 5-inch form factor fits standard drive bays
- New bare drive ready for immediate installation
ข้อมูลจำเพาะ
| Brand | IBM |
|---|---|
| Model | 81Y9886 |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 3TB |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
| น้ำหนักในการจัดส่ง | 1.36 kg |
| ขนาดบรรจุภัณฑ์ | 269 × 231 × 132 mm |
คำถามเกี่ยวกับสินค้านี้
What host controller or backplane is required to connect the SAS 6Gb/s interface of the IBM 81Y9886?
The drive uses a SAS 6Gb/s interface, so it needs a compatible SAS host bus adapter, RAID controller, or server backplane that supports 6Gb/s SAS signalling.
Can the 3.5" 7200 RPM drive share a SAS domain with slower SAS or nearline drives already in the server?
Yes, SAS domains negotiate link speed per device, so the 7200 RPM drive will run at 6Gb/s while older drives operate at their own negotiated speeds on the same domain.
How can I confirm the drive is recognised at the correct 6Gb/s link speed after installation?
Check the controller BIOS, OS dmesg output, or RAID utility; each will report the negotiated link rate for the IBM 81Y9886 as 6Gb/s when the drive is operating as intended.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



