เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

KHACHIMO

KHACHIMO 24V 1.05A Power Supply PC-6485-E FLU1-25-5

SKU CH-GZ10-DP0YM

24 V 1.05 A ATX power supply tested working for PC-6485-E and FLU1-25-5 compatibility

  • TypeATX
  • Delivers stable 24 V output for reliable system operation
  • Rated at 1.05 A to match original equipment requirements
  • Designed as direct replacement for PC-6485-E and FLU1-25-5 units
  • Each unit tested working and built to good quality standards

Replacement PSU for PC-6485-E

This 24 V 1.05 A ATX power supply is built as a direct replacement for the PC-6485-E unit used in the FLU1-25-5 system. It suits technicians and owners who need a tested, new unit to restore power to that specific platform. Buyers requiring a different voltage, connector layout or higher wattage should look elsewhere.

Thermals and power draw

The supply delivers 24 V at 1.05 A within a standard ATX form factor, so heat output and fan noise scale with the modest load of the original design. Normal operation stays within the thermal envelope established by the factory unit, and power draw at the wall matches the rated output without excess overhead.

จุดเด่น

  • Delivers stable 24 V output for reliable system operation
  • Rated at 1.05 A to match original equipment requirements
  • Designed as direct replacement for PC-6485-E and FLU1-25-5 units
  • Each unit tested working and built to good quality standards

ข้อมูลจำเพาะ

TypeATX

คำถามเกี่ยวกับสินค้านี้

How do I connect the 24V 1.05A ATX power supply to the PC-6485-E or FLU1-25-5 unit?

Match the ATX connector to the corresponding socket on the PC-6485-E or FLU1-25-5 board, press firmly until the latch clicks, and verify the 24V rail is seated before powering on.

What maintenance or replacement should I expect for the 24V 1.05A ATX power supply over time?

The unit is tested working and rated for continuous 24V 1.05A output; plan to replace it if output voltage drifts, fan noise increases, or the system becomes unstable under load.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที