เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

KHACHIMO

KHACHIMO CSU2000AP-3-204 12.2V 163.9A 2000W power supply

SKU CH-3T5V-3ZZX4

Delivers 2000W at 12.2V and 163.9A in an ATX form factor

  • TypeATX
  • Delivers 2000 W for demanding systems
  • 2 V output with 163.9 A current capacity
  • ATX form factor fits standard chassis
  • Tested working and built with good quality

12.2 V 2000 W ATX power supply

The KHACHIMO CSU2000AP-3-204 delivers 12.2 volts at up to 163.9 amps for a total of 2000 watts. It uses an ATX form factor and arrives new and tested. Builders needing a high-current single-rail unit for dense compute or industrial chassis will find it a direct fit.

Capacity and headroom

The 2000 watt rating supports multi-GPU arrays, heavy storage backplanes or clustered single-board computers that draw sustained current near the 163.9 amp limit. Systems requiring more than 12.2 volts or redundancy features fall outside this unit's specification.

จุดเด่น

  • Delivers 2000 W for demanding systems
  • 2 V output with 163.9 A current capacity
  • ATX form factor fits standard chassis
  • Tested working and built with good quality

ข้อมูลจำเพาะ

TypeATX

คำถามเกี่ยวกับสินค้านี้

Will this 2000W CSU2000AP-3-204 unit share a 12.2V rail with an older ATX supply in a dual-PSU mining rig?

The supply delivers 12.2V at 163.9A on its single rail; paralleling it with another unit requires external load-balancing circuitry because the outputs are not designed for active current sharing.

How can I verify the 163.9A output is stable after installing the CSU2000AP-3-204?

Measure the 12.2V rail with a multimeter under load; it should stay within ±5 % of 12.2V while drawing up to 163.9A, and the built-in protection should not trigger during normal operation.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที