BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Kingston Technology Corp.
16 GB DDR4-3200 ECC registered dual-rank DIMM for server memory upgrades
This 16 GB DDR4-3200 module uses a 288-pin registered DIMM form factor with ECC error correction and dual-rank 2Rx8 organization. It operates at 1.2 V with a CAS latency of CL22 and includes an Intel XMP 2.0 profile for automatic configuration. The module is built for server platforms that require registered memory with error checking.
This module suits administrators upgrading or populating servers that specifically require DDR4 registered ECC DIMMs at 3200 MT/s. It will not work in systems that accept only unbuffered non-ECC memory or that require a different DDR generation, voltage, or pin count. Builders needing higher capacities per slot or lower latencies should evaluate other modules.
The registered signal processing and on-die ECC provide the data integrity and signal stability required by qualified server motherboards. The dual-rank 2Rx8 layout influences memory controller loading and maximum population rules for each channel. Verify that the target platform supports registered ECC DDR4-3200 DIMMs before purchase.
| Brand | Kingston |
|---|---|
| Model | KTL-TS432D8P/16G |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Heat Spreader | No |
| น้ำหนักในการจัดส่ง | 0.09 kg |
| ขนาดบรรจุภัณฑ์ | 152 × 46 × 23 mm |
This module provides 16GB in a single 288-pin DIMM running at 3200MHz with CL22 latency, 1.2V operation, ECC and registered signal processing. Select it when your server requires registered ECC memory and has an available DDR4 slot for 16GB of capacity.
The module operates at DDR4-3200 (PC4-25600) with CL22 timing at 1.2V. Actual throughput depends on the server's memory controller and how many DIMMs populate each channel; the rated 3200MHz is the maximum JEDEC speed this module supports.
The 288-pin DDR4 registered ECC interface caps speed to the platform's maximum supported DDR4 frequency and requires a server motherboard that accepts registered modules. Bandwidth scales with channel count and population rules defined by the system, not by the module alone.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม