เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

Kingston Technology Corp.

Kingston Technology Corp. KVR533D2N4K2/2G 2GB (2 x 1GB) DDR2 533 desktop RAM

SKU CH-AXH4-1FFFW MPN KVR533D2N4K2/2G

A 2GB dual-channel kit of DDR2 desktop memory running at 533 MHz with CL4 latency and 1.80V operation

  • Capacity2GB (2 x 1GB)
  • SpeedDDR2 533 (PC2 4200)
  • CAS LatencyCL4
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • Dual-channel kit doubles bandwidth for DDR2 533 systems
  • CL4 latency at 1.80V keeps timing tight on PC2 4200 platforms
  • ValueRAM validation targets stable operation in mainstream desktop builds
  • Two matched 1GB modules simplify populating paired DIMM slots
  • Unbuffered non-ECC design fits standard consumer motherboards

Kingston ValueRAM DDR2 533 dual-channel kit

This Kingston ValueRAM kit provides 2 GB of DDR2 memory in a matched pair of 1 GB modules. It runs at 533 MHz with a CAS latency of 4 and operates at the standard 1.80 V. The unbuffered, non-ECC design targets desktop systems that accept DDR2 PC2 4200 memory.

Suitable for legacy DDR2 desktops needing a basic

Builders restoring or maintaining older desktops that take DDR2 533 modules will find this kit a direct, specification-compliant fit. Systems that require ECC error correction, registered buffering, higher capacities per module, or faster DDR2 speeds should look at other memory options.

DDR2 533 (PC2 4200) speed rating

The 533 MHz DDR2 rating, labelled PC2 4200, is the single specification that determines whether this kit matches the motherboard memory controller. Verify that the board explicitly supports DDR2 533 before purchasing.

จุดเด่น

  • Dual-channel kit doubles bandwidth for DDR2 533 systems
  • CL4 latency at 1.80V keeps timing tight on PC2 4200 platforms
  • ValueRAM validation targets stable operation in mainstream desktop builds
  • Two matched 1GB modules simplify populating paired DIMM slots
  • Unbuffered non-ECC design fits standard consumer motherboards

ข้อมูลจำเพาะ

BrandKingston
SeriesValueRAM
ModelKVR533D2N4K2/2G
Capacity2GB (2 x 1GB)
SpeedDDR2 533 (PC2 4200)
CAS LatencyCL4
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
น้ำหนักในการจัดส่ง0.07 kg
ขนาดบรรจุภัณฑ์171 × 95 × 13 mm

คำถามเกี่ยวกับสินค้านี้

Will these modules fit my DDR2 desktop motherboard?

These are DDR2 533 unbuffered DIMMs designed for desktop systems that accept PC2 4200 memory.

Can I use a single module instead of the pair?

The kit contains two matched 1GB sticks; using only one will run in single-channel mode and forgo the dual-channel benefit.

Does this memory require any special voltage setting?

It operates at the standard DDR2 voltage of 1.80V, so no manual adjustment is needed on most boards.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที