LORDWORLD
LORDWORLD ESP32-C6 2.06inch AMOLED Touch Watch Development Board
A 2.06 inch AMOLED touch watch development board with 410 × 502 pixel display, onboard audio codec, and WiFi 6, Bluetooth 5, Zigbee 3.0 and Thread connectivity for AI speech interaction
- Vivid colours and deep contrast from 2.06 inch AMOLED display
- Precise 410 × 502 capacitive touch input with FT3168 controller
- Independent battery-powered operation for portable prototypes
- Clear voice capture via ES8311 codec and ES7210 echo cancellation
- WiFi 6, Bluetooth 5 and IEEE 802.15.4 mesh connectivity
ESP32-C6 AMOLED Touch Watch Board
The LORDWORLD ESP32-C6 board combines a 2.06inch AMOLED display with capacitive touch and onboard audio for wearable IoT development. It integrates WiFi 6, Bluetooth 5 and IEEE 802.15.4 for Zigbee and Thread connectivity. An ES8311 codec and ES7210 echo cancellation circuit handle voice input and output. The board runs from a battery for standalone prototypes.
Developers Building Voice Wearables
Makers creating smart watches, voice assistants or sensor nodes with mesh networking will fit this board. Projects needing a larger screen, cellular modem or high-power processing should look at other platforms. Buyers who want a ready-to-wear consumer smartwatch will not find straps or an enclosure here.
410 × 502 AMOLED With Touch Driver
The 410 by 502 pixel AMOLED panel uses a CO5300 driver and FT3168 touch controller for colour-rich, responsive interaction. This display resolution and touch stack define the UI density and gesture support available to your firmware.
จุดเด่น
- Vivid colours and deep contrast from 2.06 inch AMOLED display
- Precise 410 × 502 capacitive touch input with FT3168 controller
- Independent battery-powered operation for portable prototypes
- Clear voice capture via ES8311 codec and ES7210 echo cancellation
- WiFi 6, Bluetooth 5 and IEEE 802.15.4 mesh connectivity
ข้อมูลจำเพาะ
| Brand | LORDWORLD |
|---|
คำถามเกี่ยวกับสินค้านี้
How much power does the ESP32-C6 board draw when the 2.06-inch AMOLED display runs all day?
The ESP32-C6 supports low-power Wi-Fi 6 and Bluetooth 5 operation, and the board can be powered from an external battery for independent all-day use.
What external hardware must I already have to program and power this development board?
You need a USB-C cable for flashing and serial debugging, and a Li-Po battery if you want the watch to run untethered.
Will the onboard Zigbee 3.0 and Thread radios interoperate with my existing IEEE 802.15.4 smart-home sensors?
Yes, the ESP32-C6 includes IEEE 802.15.4 support for Zigbee 3.0 and Thread, so it can join networks built around that standard.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



