BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00277131BTC
มีสินค้า
Mellanox Technologies
Mellanox MCX516A-CCAT 100GbE Dual-port QSFP28 PCIe 3.0 x16 expansion card
Adds two 100 GbE QSFP28 ports via a PCIe 3.0 x16 slot for high-speed networking
- 100 GbE throughput with dual QSFP28 ports
- PCIe 3.0 x16 lane width for high bandwidth
- ConnectX-5 controller drives low-latency networking
- New condition ensures full manufacturer reliability
- First listed by manufacturer in October 2024
Network Interface Card 100GbE Dual Port
The Mellanox MCX516A-CCAT is a ConnectX-5 based network interface card delivering 100GbE throughput across two QSFP28 ports. It targets datacentre and high-performance computing environments that need low-latency Ethernet connectivity. The card installs in a PCIe 3.0 x16 slot and is supplied in new condition.
PCIe 3.0 x16 Slot QSFP28 Cabling
Integration requires an available PCIe 3.0 x16 lane and compatible QSFP28 transceivers or direct-attach cables for each port. The dual-port design frees a second expansion slot that would otherwise be occupied by a single-port adapter. Adequate chassis airflow must be provided for the card’s thermal envelope.
High-Density 100GbE Deployments
This adapter suits clusters, storage fabrics and hyper-scale workloads demanding 100GbE density in a half-height form factor. It is not intended for desktop PCs lacking PCIe 3.0 x16 bandwidth or QSFP28 cabling infrastructure. Buyers needing Fibre Channel or InfiniBand protocols should select a different ConnectX variant.
จุดเด่น
- 100 GbE throughput with dual QSFP28 ports
- PCIe 3.0 x16 lane width for high bandwidth
- ConnectX-5 controller drives low-latency networking
- New condition ensures full manufacturer reliability
- First listed by manufacturer in October 2024
ข้อมูลจำเพาะ
ยังไม่มีข้อมูลจำเพาะที่เผยแพร่สำหรับสินค้านี้
คำถามเกี่ยวกับสินค้านี้
What is the PCIe lane width that limits sustained throughput on the MCX516A-CCAT?
The card uses a PCIe 3.0 x16 interface, so the lane width is 16 lanes.
How much power does the ConnectX-5 controller draw when both 100 GbE ports run continuously?
Typical power draw is 24 W for the dual-port 100 GbE configuration.
Which transceiver modules must I already own to connect the two QSFP28 ports?
You need two QSFP28 modules or cables rated for 100 GbE, one per port.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
