Micron
Micron MTA36ASF4G72PZ-3G2R1 32GB DDR4-3200 ECC Registered DIMM
32 GB DDR4 ECC registered dual-rank DIMM running at 3200 MHz with CL22 latency and 1.20 V operation
- Capacity32GB
- ECCECC
- ECC protection detects and corrects single-bit errors
- Registered signal processing reduces electrical load on the memory controller
- Dual-rank architecture increases memory density per DIMM slot
- 32 GB capacity at DDR4-3200 speed supports demanding server workloads
- 20 V operating voltage lowers power consumption per module
Server memory module
The Micron MTA36ASF4G72PZ-3G2R1 is a 32GB DDR4-3200 registered DIMM built for enterprise servers and workstations. It operates at 3200 MHz with CL22 latency and a standard 1.20 V supply. Dual-rank organisation and ECC provide data integrity for mission-critical workloads.
Sustained operation behaviour
Registered signal processing reduces electrical load on the memory controller, helping stability when all slots are populated. ECC detects and corrects single-bit errors during continuous operation. The module runs at its rated DDR4-3200/PC4-25600 speed under sustained load without downclocking.
DDR4 interface limits
The 288-pin DIMM form factor fits standard DDR4 server sockets only. Maximum bandwidth is defined by the PC4-25600 specification at 3200 MHz. Dual-rank density may limit the total number of modules per channel on some platforms. Voltage is fixed at 1.20 V with no XMP profiles.
จุดเด่น
- ECC protection detects and corrects single-bit errors
- Registered signal processing reduces electrical load on the memory controller
- Dual-rank architecture increases memory density per DIMM slot
- 32 GB capacity at DDR4-3200 speed supports demanding server workloads
- 20 V operating voltage lowers power consumption per module
ข้อมูลจำเพาะ
| Brand | Micron |
|---|---|
| Capacity | 32GB |
| ECC | ECC |
| น้ำหนักในการจัดส่ง | 0.45 kg |
| ขนาดบรรจุภัณฑ์ | 102 × 51 × 25 mm |
คำถามเกี่ยวกับสินค้านี้
How much power does the 1.20 V DDR4-3200 module draw under continuous server load?
The module operates at 1.20 V, the standard DDR4 voltage, keeping power draw low during all-day workloads.
What motherboard slot and firmware features are required to run this 288-pin ECC Registered DIMM?
A DDR4 RDIMM slot with ECC and registered-signal support in the BIOS is needed for the 288-pin module to function.
Can this dual-rank CL22 stick share a channel with older single-rank DDR4 DIMMs?
Mixing ranks and latencies on the same channel is not recommended; use identical modules per channel for stability.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



