myVolts
myVolts ADP-240AR 5-pin power supply for PS4 CUH-1101A series
Replacement 5-pin PSU delivering 12 V DC for PS4 CUH-1101A series consoles
- TypeAT
- Works worldwide with 100-240V AC input
- Delivers stable 12V DC output for PS4
- Fits CUH-1101A series and compatible models
- 5-pin connector matches original console socket
- Replacement unit sourced from original device disassembly
Replacement PSU for PS4 CUH-1101A series
The myVolts ADP-240AR is a direct replacement power supply for Sony PlayStation 4 consoles in the CUH-1101A series, covering model numbers 1100A through 1116A. It uses a 5-pin connector and delivers a 12V DC output from a 100-240V AC input rated at 2.5A. The unit is sold as a disassembly part taken from an original device and may show minor cosmetic scratches.
Upgrading from a failed original unit
This supply replaces the factory-fitted ADP-240AR when the original fails or develops noise and instability. The jump is worth it when the console no longer powers on, shuts down under load or exhibits coil whine that points to the PSU. It restores the exact 12V rail the motherboard expects without requiring any wiring changes or firmware updates.
Capacity and headroom for the 500GB console
The 12V output comfortably runs the CUH-1101A main board, optical drive and a 500GB hard drive under typical gaming loads. Headroom is limited to the factory design envelope; sustained heavy loads combined with restricted ventilation can push the unit to its thermal limits. It does not support higher-wattage upgrades or additional internal peripherals beyond the stock configuration.
จุดเด่น
- Works worldwide with 100-240V AC input
- Delivers stable 12V DC output for PS4
- Fits CUH-1101A series and compatible models
- 5-pin connector matches original console socket
- Replacement unit sourced from original device disassembly
ข้อมูลจำเพาะ
| Type | AT |
|---|
คำถามเกี่ยวกับสินค้านี้
Will the 5-pin ADP-240AR fit inside my CUH-1101A series PS4 chassis?
The ADP-240AR is built as a direct replacement for the CUH-1101A series and shares the same 5-pin connector used across the 1100A–1116A models, so it fits the original mounting points and power socket.
What is the step people miss when installing the ADP-240AR in a CUH-1101A PS4?
After sliding the unit into the bay, the 5-pin plug must be fully seated before the retaining screw is tightened; a loose plug causes intermittent power even if the screw feels secure.
Which part of the ADP-240AR will need attention after long-term use in a CUH-1101A console?
The internal cooling fan is the only moving component; dust build-up on its blades reduces airflow and eventually requires cleaning or fan replacement to keep the 12 V output stable.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



