myVolts
myVolts Power Supply for HP Pavilion 510-p171jp DT PC
AT-type replacement power supply with 20+4 pin ATX, +12 V 4-pin, 6-pin and SATA connectors for HP Pavilion 510-p171jp desktop
- TypeAT
- Replacement upgrade PSU for HP Pavilion 510-p171jp
- 20+4 pin ATX connector powers the motherboard
- +12V 4-pin connector supplies CPU power
- Three SATA connectors drive storage devices
- 6-pin power connector supports graphics cards
Compatible HP Pavilion Model
This replacement power supply is built for the HP Pavilion 510-p171jp desktop PC. It suits owners of that specific model who need a direct swap for a failed or ageing unit. Builders working on other chassis or proprietary form factors should look elsewhere.
Connector Layout Decides Fit
The unit provides one 20+4 pin ATX connector, one +12V 4-pin power connector, one 6-pin power connector and three SATA connectors. A mini-SATA connector for 5-inch devices is also listed. If your motherboard or drives require different plugs, this PSU will not work.
Straightforward Swap With Cable Checks
Installation follows the standard ATX procedure: unplug the old unit, route the new cables and secure the four mounting screws. The fixed cable set means you cannot remove unused leads, so verify lengths reach every socket before closing the case.
จุดเด่น
- Replacement upgrade PSU for HP Pavilion 510-p171jp
- 20+4 pin ATX connector powers the motherboard
- +12V 4-pin connector supplies CPU power
- Three SATA connectors drive storage devices
- 6-pin power connector supports graphics cards
ข้อมูลจำเพาะ
| Type | AT |
|---|
คำถามเกี่ยวกับสินค้านี้
What does the AT label tell me about how this PSU behaves in the HP Pavilion 510-p171jp?
AT means the unit is designed as a direct replacement for the original power supply in that desktop, matching its form factor and connector layout.
Which motherboard power standard does the 20+4 pin connector follow, and what does it limit?
The 20+4 pin ATX connector fits the Pavilion 510-p171jp motherboard socket and delivers the standard ATX voltage rails required by that board.
What clearance or mounting points does this PSU need inside the Pavilion 510-p171jp case?
It uses the standard AT mounting holes and dimensions for the Pavilion 510 chassis, so it secures with the existing screws and fits the rear cutout.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



