myVolts
myVolts Replacement Power Supply HP 5187-1098 5187-5008 585008-001 Elite HPE-210Y
Replacement AT power supply with reduced depth, 24-pin motherboard connector, three SATA and three Molex outputs, plus 4-pin CPU power
- TypeAT
- Reduced depth fits compact HP Elite HPE-210Y cases
- 24-pin plus 4-pin CPU powers motherboard directly
- Three SATA connectors support multiple storage drives
- 110/220V auto-switch works worldwide without adapters
- Low ripple output protects sensitive components longer
Compatible HP Elite Replacement
This power supply replaces the HP 5187-1098, 5187-5008 and 585008-001 units found in Elite HPE-210Y desktops. It fits a standard ATX mounting pattern while using a reduced depth of 5.86" x 3.3" for increased compatibility with tighter branded chassis.
Fixed Cable Set and Voltage Rails
Built-in cabling provides a 24-pin (20+4) motherboard connector, one 4-pin CPU connector, three SATA 15-pin plugs, two Molex 4-pin plugs and one floppy 4-pin plug. The unit delivers +3.3V, +5V, -5V, +12V1, +12V2, -12V and +5V standby rails across its AT design.
80mm Fan Cooling and Input Range
An 80mm fan handles thermal management for stable, long-life operation. The supply accepts 110/220V AC at 47–63Hz, with a rise time under 70ms and a minimum hold-up time of 17ms at nominal input. Low ripple and noise levels are specified.
จุดเด่น
- Reduced depth fits compact HP Elite HPE-210Y cases
- 24-pin plus 4-pin CPU powers motherboard directly
- Three SATA connectors support multiple storage drives
- 110/220V auto-switch works worldwide without adapters
- Low ripple output protects sensitive components longer
ข้อมูลจำเพาะ
| Type | AT |
|---|
คำถามเกี่ยวกับสินค้านี้
Will the 5.86" depth leave room for my existing drive cages in the HPE-210Y?
The reduced depth is designed to fit standard ATX bays without extending as far as traditional units, clearing space for drive cages.
How can I confirm the 80 mm fan is spinning and voltages are stable after install?
Listen for the 80 mm fan at startup and use a multimeter on the 24-pin connector to verify +3.3 V, +5 V, +12 V1, +12 V2, -12 V and +5 VSB rails.
Which cables come attached and what extra connectors might I need?
Fixed cables include 24-pin ATX, one 4-pin CPU, three SATA 15-pin, two Molex 4-pin and one floppy 4-pin; no modular leads are included.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



