BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00276426BTC
มีสินค้า
NEMIX RAM
NEMIX RAM 16GB (1X16GB) DDR4 2133 CL15 2Rx8 1.2V 260-pin SODIMM for POSIFLEX XT-6315E memory upgrade
16 GB DDR4 SODIMM at 2133 MHz CL15, 1.2 V, 2Rx8, built for the POSIFLEX XT-6315E terminal
- Capacity16GB
- SpeedDDR4 2133 (PC4 17000)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB capacity expands terminal multitasking headroom
- DDR4 2133 speed matches POSIFLEX XT-6315E specification
- CL15 latency keeps data access responsive
- 2 V operation reduces power draw
- 260-pin SODIMM form factor fits the JIVA terminal slot
POSIFLEX XT-6315E memory upgrade
This 16 GB DDR4 SODIMM is built for the POSIFLEX XT-6315E JIVA fanless terminal. It delivers a straightforward capacity increase for point-of-sale workloads. The module runs at 2133 MT/s with CL15 latency and 1.2 V operation. Major OEM chips from Samsung, Micron or Hynix are used throughout.
Check your terminal before ordering
Verify that the XT-6315E motherboard accepts a single 260-pin DDR4 SODIMM and supports 16 GB per slot. Confirm the system requires non-ECC unbuffered memory and operates at 1.2 V. Ensure no BIOS restriction limits total capacity or rank configuration. The board must accommodate a 2Rx8 organisation.
Single stick simplifies installation
The package contains one 16 GB module so no pairing or matching is required. Immediate capacity gain follows a standard SODIMM swap. No heat spreader means the module fits tight chassis clearances in the fanless design. Lifetime replacement warranty covers the memory itself.
จุดเด่น
- 16 GB capacity expands terminal multitasking headroom
- DDR4 2133 speed matches POSIFLEX XT-6315E specification
- CL15 latency keeps data access responsive
- 2 V operation reduces power draw
- 260-pin SODIMM form factor fits the JIVA terminal slot
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS17000-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM |
คำถามเกี่ยวกับสินค้านี้
Does the module arrive alone or with any extra brackets or tools?
The package contains a single 16 GB DDR4 2133 SODIMM and nothing else; no brackets or tools are included.
Is the 16 GB 2133 CL15 stick the only variant offered for the XT-6315E?
Yes, this listing supplies only the 16 GB DDR4 2133 CL15 2Rx8 module for that terminal.
What does the 2133 MHz rating mean once the stick is installed in the POSIFLEX terminal?
The memory runs at 2133 MHz with CL15 latency at 1.20 V, delivering the rated PC4-17000 bandwidth in the XT-6315E.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
