BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00277478BTC
มีสินค้า
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR5 5600 CL46 UDIMM Kit for ASUS ProArt X870E-CREATOR WiFi
A 16GB dual-channel DDR5 kit running at 5600MHz with CL46 timing and 1.1V operation, validated for the ASUS ProArt X870E-CREATOR WiFi motherboard
- Capacity16GB (2 x 8GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 16 GB dual-channel kit speeds up multitasking on the ASUS ProArt X870E-CREATOR WiFi
- DDR5 5600 MT/s data rate delivers high bandwidth for creative workloads
- CL46 CAS latency supports responsive operation at standard timing
- 10 V operating voltage reduces power draw during extended sessions
- 288-pin UDIMM form factor fits directly into desktop DIMM slots
NEMIX RAM 16GB DDR5 5600 Kit
This 16GB kit contains two 8GB DDR5 5600 UDIMM modules built for the ASUS ProArt X870E-CREATOR WiFi motherboard. It targets creators and professionals who need reliable, non-ECC memory for workstation tasks. The 1Rx8 organisation and 1.1V operation match the platform requirements. No heat spreader is included.
Sustained workload behaviour
Running at CL46 latency and PC5-44800 speed, the modules deliver steady throughput during long rendering or compile sessions. The unbuffered design keeps latency low without registered overhead. Major OEM chips from Samsung, Micron or Hynix provide consistent signal integrity under continuous load. Voltage stays at 1.10V throughout extended use.
Installation notes
The 288-pin DDR5 UDIMM form factor slots directly into the board without extra cables or tools. Align the notch, press firmly until the latches click, and the system recognises the kit automatically. Builders who need ECC error correction or registered buffering cannot use this kit. Systems requiring a different DDR generation will not accept these modules.
จุดเด่น
- 16 GB dual-channel kit speeds up multitasking on the ASUS ProArt X870E-CREATOR WiFi
- DDR5 5600 MT/s data rate delivers high bandwidth for creative workloads
- CL46 CAS latency supports responsive operation at standard timing
- 10 V operating voltage reduces power draw during extended sessions
- 288-pin UDIMM form factor fits directly into desktop DIMM slots
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2 x 8GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
How much power does this 1.1 V DDR5 5600 kit draw when the system runs all day?
The modules operate at the standard DDR5 voltage of 1.10 V, so power draw stays within the JEDEC baseline for 5600 MT/s UDIMMs.
What must the motherboard provide for this 288-pin 1Rx8 kit to function?
The ASUS ProArt X870E-CREATOR WiFi board supplies four DDR5 UDIMM slots and the memory controller needed for 5600 MT/s CL46 operation.
Will this 1Rx8 DDR5 5600 kit work alongside any existing DDR5 modules I keep in the system?
Mixing is possible if the other modules are also DDR5 UDIMMs; the board will train all sticks to a common speed and latency.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
