NEMIX RAM
NEMIX RAM 16GB DDR4 3200 ECC UDIMM SuperMicro M12SWA-TF memory upgrade
16 GB DDR4 3200 ECC UDIMM module built for SuperMicro M12SWA-TF servers
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data errors in critical workloads
- 16GB capacity expands memory for demanding applications
- DDR4 3200 speed delivers high bandwidth performance
- 2V operation reduces power consumption and heat
- 288-pin UDIMM fits SuperMicro M12SWA-TF systems
SuperMicro M12SWA-TF compatible ECC UDIMM
This 16GB DDR4 3200 module is built for the SuperMicro M12SWA-TF platform. It delivers error-correcting unbuffered memory for servers and workstations that require data integrity. The single 288-pin DIMM installs in minutes to expand system capacity.
Sustained load behaviour with ECC protection
ECC circuitry detects and corrects single-bit errors during continuous operation, preventing silent data corruption in long-running workloads. Unbuffered topology keeps latency low while the 1.2V supply limits thermal output. CL22 timing remains stable across extended sessions without throttling.
Upgrades from lower-capacity or non-ECC modules
Replacing smaller DIMMs or non-ECC memory adds 16GB of protected capacity in one slot, ideal when the board has limited sockets. The jump is worthwhile for virtualisation hosts, NAS appliances or workstations that cannot tolerate memory errors. Builders needing registered RDIMM support or higher frequencies must choose a different module.
จุดเด่น
- ECC protection prevents data errors in critical workloads
- 16GB capacity expands memory for demanding applications
- DDR4 3200 speed delivers high bandwidth performance
- 2V operation reduces power consumption and heat
- 288-pin UDIMM fits SuperMicro M12SWA-TF systems
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ ECC Unbuffered UDIMM |
| Part Number | ME25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM |
คำถามเกี่ยวกับสินค้านี้
How much power does this 1.2 V DDR4 3200 module draw when the server runs continuously?
The module operates at 1.2 V, the standard DDR4 voltage. Actual power draw depends on workload and the SuperMicro M12SWA-TF platform, but the low voltage helps limit heat during all-day operation.
Does the SuperMicro M12SWA-TF need any specific BIOS setting or firmware version before this ECC UDIMM is recognised?
The module is built to JEDEC DDR4 3200 PC4-25600 CL22 2Rx8 specifications. Installation follows the motherboard manual; no extra hardware is required beyond a compatible UDIMM slot.
Will this 288-pin ECC UDIMM work in the same SuperMicro M12SWA-TF alongside older DDR4 sticks of a different speed?
The board will run all installed modules at the speed of the slowest stick. Mixing ranks or speeds is possible but may reduce stability; matching 3200 CL22 2Rx8 modules is recommended.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



