SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00500325BTC
มีสินค้า
NEMIX RAM
NEMIX RAM 256GB 2x128GB DDR5 5600MHz ECC RDIMM Supermicro H13SSF memory upgrade
256GB dual-rank DDR5-5600 ECC RDIMM kit validated for Supermicro H13SSF servers
- Capacity256GB (2 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 256 GB capacity from two 128 GB modules for maximum server density
- DDR5 5600 speed with CL46 timing delivers rated bandwidth out of the box
- Registered ECC architecture corrects single-bit errors to prevent silent data corruption
- 1 V operation reduces power draw across fully populated DIMM slots
- 288-pin RDIMM form factor matches Supermicro H13SSF memory-population rules exactly
Exact-Match Server Upgrade
This 256GB kit delivers two 128GB DDR5 5600MHz ECC Registered RDIMMs built to the precise rank, voltage and timing the Supermicro H13SSF motherboard expects. It is intended for administrators who need the full supported capacity recognised immediately and running at rated speed without manual tuning.
Verified Fitment and Stability
The modules use the 288-pin RDIMM form factor this board requires, not UDIMM or SODIMM, and are spec-matched to its memory-population rules. Registered architecture offloads the memory controller so every slot runs fully populated, while ECC catches and corrects single-bit errors on the fly to stop silent data corruption and unplanned reboots before they reach production.
Lifetime Support and Pre-Purchase Checks
The kit is backed by a lifetime replacement warranty and free US-based technical support. Buyers must consult their system or motherboard manual for supported capacities, approved DIMM population order and installation steps before purchase, because server memory support varies by model and configuration.
จุดเด่น
- 256 GB capacity from two 128 GB modules for maximum server density
- DDR5 5600 speed with CL46 timing delivers rated bandwidth out of the box
- Registered ECC architecture corrects single-bit errors to prevent silent data corruption
- 1 V operation reduces power draw across fully populated DIMM slots
- 288-pin RDIMM form factor matches Supermicro H13SSF memory-population rules exactly
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-724K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
Does this DDR5-5600 RDIMM kit run at its rated 5600 MT/s on the Supermicro H13SSF, or does the board cap it lower?
The kit is spec-matched to the H13SSF so the memory controller recognises the exact rank, voltage and timing, allowing the modules to operate at the full DDR5-5600 (PC5-44800) data rate when populated per the board's rules.
What physical slot and form factor does this 256 GB kit require on the H13SSF motherboard?
It uses the 288-pin Registered RDIMM form factor that the H13SSF expects; UDIMM or SODIMM modules will not fit or function in these slots.
What is the correct installation sequence for the two 128 GB modules on this board?
Consult the H13SSF manual for the approved DIMM population order; the board's memory-population rules dictate which slots must be filled first to achieve full 256 GB capacity and rated speed.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
US$74.99
0.00095715BTC
มีสินค้า