NEMIX RAM
NEMIX RAM 256GB (8x32GB) DDR4 2666 ECC RDIMM memory upgrade
256 GB DDR4 ECC registered server memory kit in eight 32 GB modules at 2666 MHz for Synology FlashStation FS6400 NAS
- Capacity256GB (8 x 32GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 256GB total capacity expands server memory headroom with eight 32GB modules
- DDR4 2666MHz PC4-21300 speed matches Synology FlashStation FS6400 specifications
- ECC registered RDIMM design protects data integrity in mission-critical NAS workloads
- 2V operating voltage reduces power draw across all eight modules
- Major OEM Samsung Micron Hynix chipsets ensure enterprise-grade reliability and compatibility
Synology FS6400 256GB ECC RDIMM kit
This 256GB kit contains eight 32GB DDR4 2666 registered DIMMs built for the Synology FlashStation FS6400 NAS. Each module runs at 1.2V with CL19 latency and uses 2Rx4 organisation. ECC and registered buffering protect data integrity in the storage appliance.
Suited for FS6400 capacity expansion.
The kit targets administrators who need to reach the maximum supported memory in a Synology FlashStation FS6400. Systems that require unbuffered UDIMMs, non-ECC memory, or speeds other than DDR4 2666 cannot use these modules.
Eight-module kit fills all slots at once
The package delivers eight matched 32GB RDIMMs in a single kit, allowing a complete population of the FS6400 memory slots without mixing part numbers. No heat spreaders are included, and no additional software or accessories are bundled.
จุดเด่น
- 256GB total capacity expands server memory headroom with eight 32GB modules
- DDR4 2666MHz PC4-21300 speed matches Synology FlashStation FS6400 specifications
- ECC registered RDIMM design protects data integrity in mission-critical NAS workloads
- 2V operating voltage reduces power draw across all eight modules
- Major OEM Samsung Micron Hynix chipsets ensure enterprise-grade reliability and compatibility
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR21300-324K8 |
| Capacity | 256GB (8 x 32GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (8X32GB) DDR4 2666MHZ PC4-21300 2Rx4 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory KIT |
คำถามเกี่ยวกับสินค้านี้
Do I need a Synology FlashStation FS6400 NAS for this 256GB DDR4 2666 ECC RDIMM kit to work?
Yes, this 8 x 32GB registered kit is validated for the Synology FlashStation FS6400. The platform must accept 288-pin DDR4 RDIMM modules at 1.20 V with CL19 timing.
Can I keep my existing DDR4 2666 ECC RDIMM modules and add this 256GB kit alongside them?
Only if the NAS has free 288-pin slots and supports mixed 2Rx4 ranks at the same 2666 MT/s speed and 1.20 V voltage. Matching rank and timing avoids instability.
How can I confirm the 256GB kit is running at 2666 MT/s with ECC active after installation?
Open the Synology DSM interface, go to System Information, and verify the total memory shows 256 GB at 2666 MHz with ECC status reported as enabled.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



