NEMIX RAM
NEMIX RAM 288GB 6x48GB DDR5 6400 CL52 ECC RDIMM Supermicro H14SSF memory upgrade
Six 48 GB DDR5 modules provide 288 GB of registered ECC memory at 6400 MT/s with CL52 latency and 1.1 V operation for the Supermicro H14SSF
- Capacity288GB (6 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match 288 GB kit runs at rated DDR5-6400 speed
- Registered ECC design prevents silent data corruption under load
- Verified fit for Supermicro H14SSF motherboard DIMM slots
- 2Rx8 organisation enables full-capacity population across six slots
- Lifetime replacement warranty with US-based technical support
288GB DDR5 ECC RDIMM kit for Supermicro H14SSF
This 288GB kit contains six 48GB DDR5-6400 registered ECC modules built for the Supermicro H14SSF motherboard. It targets server administrators who need maximum memory capacity in every available slot with full error correction.
Registered 2Rx8 DDR5-6400 at 1.1V with CL52
The single specification that determines compatibility is the registered 2Rx8 DDR5-6400 configuration running at 1.1V with CL52 latency. The motherboard's memory controller expects this exact rank, voltage and timing combination to recognise the full 288GB and operate at rated speed.
288-pin RDIMM installation follows board
Installation uses standard 288-pin RDIMM slots, but the Supermicro H14SSF requires a specific DIMM population order when all slots are filled. The most common issue is inserting modules in the wrong sequence, which prevents the system from booting or recognising the full capacity. Consult the motherboard manual for the approved installation steps before starting.
จุดเด่น
- Exact-match 288 GB kit runs at rated DDR5-6400 speed
- Registered ECC design prevents silent data corruption under load
- Verified fit for Supermicro H14SSF motherboard DIMM slots
- 2Rx8 organisation enables full-capacity population across six slots
- Lifetime replacement warranty with US-based technical support
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K6 |
| Capacity | 288GB (6 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 288GB 6X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
What does the 6400 MT/s rating mean once the modules are installed in the Supermicro H14SSF?
The kit runs at DDR5 6400 (PC5 51200) with CL52 latency at 1.1 V, so the memory controller recognises the full 288 GB and operates at the rated speed when all six slots are populated.
How does the registered ECC RDIMM interface affect real-world operation?
Registered buffering offloads the memory controller, allowing every slot to run fully populated at full capacity, while ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots.
What physical requirements must the Supermicro H14SSF meet to accept this kit?
The board needs six free 288-pin DDR5 RDIMM slots and must follow its documented DIMM population order for 2Rx8 registered modules.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



