NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V UDIMM memory upgrade for Dell Alienware Aurora R16
DDR5 5600 UDIMM kit adds 32 GB in two 16 GB modules at CL46 and 1.1 V for the Dell Alienware Aurora R16
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit expands system capacity with two 16 GB modules
- DDR5 5600 speed delivers high data throughput at PC5-44800
- CL46 latency supports responsive operation at 1.1 V
- 288-pin UDIMM form factor fits Alienware Aurora R16 slots
- Samsung Micron Hynix chips provide reliable non-ECC unbuffered performance
32GB DDR5 kit for Alienware Aurora R16
This 32GB kit contains two 16GB DDR5 UDIMM modules rated at 5600MHz with CL46 latency. It is built specifically for the Dell Alienware Aurora R16 desktop and runs at the standard 1.10V voltage.
Suits owners adding 32GB to a compatible Aurora R16
The kit targets users who want a straightforward capacity increase for the named system. It is not ECC memory, so buyers who require error correction for server workloads should look elsewhere. The modules lack a heat spreader, which may limit appeal for enthusiasts seeking thermal headroom for manual overclocking.
Handles mainstream multitasking
Two 1Rx8 ranks provide 32GB of bandwidth at PC5-44800 without voltage adjustment. The CL46 timing delivers stock JEDEC performance for everyday workloads. Headroom ends at the rated frequency and latency; the kit does not support XMP profiles or higher data rates beyond the 5600MHz specification.
จุดเด่น
- 32 GB kit expands system capacity with two 16 GB modules
- DDR5 5600 speed delivers high data throughput at PC5-44800
- CL46 latency supports responsive operation at 1.1 V
- 288-pin UDIMM form factor fits Alienware Aurora R16 slots
- Samsung Micron Hynix chips provide reliable non-ECC unbuffered performance
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR5 5600MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
Does the Aurora R16 need four free DDR5 slots to install this 32 GB kit?
The kit contains two 16 GB modules, so only two free 288-pin DDR5 UDIMM slots are required.
Will the 5600 MHz modules down-clock automatically if the Aurora R16 motherboard only supports a lower DDR5 speed?
Yes, DDR5 UDIMMs negotiate the highest common speed with the memory controller, so they will run at the board's maximum supported rate.
How can I confirm the system is running the new memory at 5600 MT/s with CL46 timings after installation?
Open Task Manager's Performance tab or run CPU-Z and verify the speed reads 5600 MT/s and the CAS latency shows 46.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



